AirTAC MBLJ Series Adjustable Mini Cylinders

The MBLJ series is the adjustable-stroke version of the AirTAC MBL aluminum-barrel mini round cylinder. It shares the MBL barrel, piston rod, ports and mounting hardware, but adds an external adjusting screw and stop nut. This lets you shorten the extend stroke on site within a per-model window, so you can fine-tune the forward end position at commissioning without adding external stops.

The range spans six bores from 20 to 63 mm, with rod diameters from 8 mm up to 16 mm. Ports are G1/8 on 20-32 mm bores and G1/4 on 40-63 mm bores, available in PT, G and NPT threads. Standard strokes reach 500 mm, with special orders available to 800 mm. The force class spans about 157 N push at 0.5 MPa on the 20 mm bore, up to 1558 N on the 63 mm bore. Theoretical maximum force at 1.0 MPa spans about 32 kgf to 318 kgf.

The shared design is double acting with a fixed rubber bumper. The bumper decelerates the piston near stroke end but does not lock or hold position; if load holding is required, add a mechanical lock or pilot check valve. The cylinder operates at 0.15-1.0 MPa with 40 um filtered air, supports speeds of 30-800 mm/s, and runs in -20 to +70 C temperatures. The carbon steel rod has a 20 um chrome plating. An -S magnet option supports CMSG, DMSG and EMSG sensors. Mounting options include LB foot, FA flange and SDB pivot brackets, with U or CA back covers. This is a compact aluminum mini cylinder, not an ISO standard cylinder.