Airtac F-MF-I Adapter Assembly Kit F-MF40I
Brand: AIRTAC
Series: F-MF-I
Category: Pneumatic Automation Components Professional Description: The AIRTAC F-MF-I Series represents precision-engineered Type I pneumatic cylinder connectors designed for industrial automation systems. This complete fitting solution features standardized thread specifications and optimized flow path architecture, ensuring leak-free connections in pneumatic control circuits. The kit includes factory-assembled components with corrosion-resistant brass construction and BSPP/BSPT/NPT thread compatibility. Engineered for 0-1.0 MPa operating pressure range, these fittings demonstrate exceptional vibration resistance and maintain consistent performance across -5°C to 60°C operational temperatures. Ideal for pneumatic cylinder port connections in automated machinery, the series complies with ISO 6432 standards while incorporating AIRTAC's proprietary sealing technology for enhanced durability in high-cycle applications.
AirTAC F-MF-I Series Fitting Kit F-MF40I Technical Details
- Model Code: F-MF40I
- Series: F-MF-I (Industrial Quick Connectors)
- Body Material: Nickel-plated brass (ISO 1179 compliant)
- Seal Material: HNBR (Hydrogenated Nitrile) with PTFE coating
- Port Size: 1/4" BSPP (G1/4 parallel thread)
- Operating Pressure: 0.5-1.6 MPa (72.5-232 psi)
- Burst Pressure: ≥4.8 MPa (696 psi)
- Temperature Range: -20℃ to 80℃ (-4°F to 176°F)
- Flow Rate: 2500 NL/min (ANR, ΔP=0.1MPa)
- Thread Engagement: 6 full turns for secure sealing
- Weight: 220g ±5g (including packaging)
- Dimensions: 50mm(L) × 30mm(W) × 25mm(H)
- Surface Treatment: Electroless nickel plating (8-12μm thickness)
- Compatible Fluids: Compressed air, inert gases (N₂/CO₂)
- IP Rating: IP40 (protected against 1mm particles)
High-flow industrial quick-connect coupling set featuring triple-seal technology for leak-free pneumatic connections. The 45° push-to-lock mechanism enables single-hand operation with tactile engagement feedback. Includes integrated dust caps with retention chains and an O-ring lubrication packet (3g silicone grease).
- High-cycle pneumatic tool connections in automotive assembly lines
- Modular equipment interfaces for semiconductor FOUP handling
- Mobile hydraulic test bench quick-disconnect points
- Packaging line air knife supply connections
- Plastic injection molding machine auxiliary air lines
Installation protocol:
Apply 0.3-0.5Nm torque during assembly. Replace O-rings every 50,000 cycles or
12 months (whichever comes first). Use thread sealant only on male ports,
avoiding contact with sealing surfaces.
Compatibility note:
Not recommended for acetylene or oxygen systems. Avoid prolonged exposure to
phosphate ester-based lubricants which may degrade HNBR seals.
| Property | Property Value |
|---|---|
| sku | F-MF40I |
Rücksendungen unbenutzter Artikel werden innerhalb von 15 Tagen nach Erhalt oder Erhalt der Sendungsnummer akzeptiert. Sie als Kunde sind verpflichtet, uns vor der Rücksendung per E-Mail zu informieren, jedoch nur in folgenden Fällen:
- Ich habe den falschen Artikel erhalten.
- Der Artikel entsprach nicht den Erwartungen (z. B. beschädigte Verpackung).
- Der Artikel wies Mängel auf.
- Überschreitung der Lieferzeit.
- Der Versender gestattet keine Warenprüfung vor der Bezahlung.
Die zurückgesendeten Produkte müssen sich in der Originalverpackung befinden, sicher verpackt, unbeschädigt und ungetragen sein. Das bedeutet, dass die Artikel zum Schutz während des Transports sicher in einem Karton verpackt sein müssen, idealerweise in demselben Karton, der für den Versand an Sie verwendet wurde.