Airtac F-PB-Y Connector Assembly Kit F-PB12Y
Brand: Airtac
Series: F-PB-Y Union Fitting Assembly Kit
This professional-grade pneumatic connector solution features standardized Y-shaped port configuration with precision-machined threads for leak-proof connectivity. Engineered for cylinder piping systems requiring 120° branch connections, the assembly includes pre-configured components with corrosion-resistant electrogalvanized finish. Compatible with ISO 6431/6432 cylinder interfaces, it supports working pressures up to 1.0MPa while maintaining φ8-φ16mm flow efficiency. The kit contains factory-tested union bodies, sealing elements, and mounting accessories for O.D.-based tube installations.
AirTAC F-PB-Y Series Quick Coupling Assembly Kit F-PB12Y Technical Details
- Model: F-PB12Y (Complete Assembly Kit)
- Type: Push-to-connect pneumatic quick coupling (plug + socket set)
- Material: Brass body with nickel plating
- Seal material: NBR (Nitrile) rubber
- Applicable tube OD: 12mm (metric series)
- Operating pressure: 0-1.0 MPa (145 psi)
- Burst pressure: ≥3.0 MPa (435 psi)
- Temperature range: -20℃ to +80℃
- Thread specification: G1/8" BSPP female threads (both ends)
- Flow rate: 350 NL/min (at 0.5 MPa)
- Leakage: <0.1 mL/min (under 0.5 MPa air pressure)
- Weight: 98g ±2g (complete pair)
- Dimensions (single unit): 42mm(L) × 24mm(W) × 24mm(H)
- Vibration resistance: 10-60Hz, 1.5mm amplitude
- Durability: 20,000+ connection cycles
Premium quick-disconnect coupling pair featuring one-touch tube connection with integrated check valve mechanism. The 30° push-lock design prevents accidental disconnection while allowing tool-free tube release. Nickel-plated brass construction ensures corrosion resistance in humid environments. Includes built-in dust cap for socket protection.
- Modular pneumatic system installations
- Mobile air compressor tool connections
- CNC machine tool coolant line interfaces
- Agricultural sprayer system quick-changes
- Robotic arm end effector swaps
Installation guidance:
For optimal performance, cut tubes square using proper tubing cutter.
Insertion depth should reach 23mm until audible click. Test pull strength
(≥50N required) after installation. Lubricate threads with PTFE tape
for airtight sealing.
Compatibility note:
Designed for polyurethane/nylon pneumatic tubing only. Not suitable
for fuel lines or chemical transfer. Maximum operating temperature
reduces to 60℃ when used with oil-mist lubricated systems.
| Property | Property Value |
|---|---|
| sku | F-PB12Y |
Rücksendungen unbenutzter Artikel werden innerhalb von 15 Tagen nach Erhalt oder Erhalt der Sendungsnummer akzeptiert. Sie als Kunde sind verpflichtet, uns vor der Rücksendung per E-Mail zu informieren, jedoch nur in folgenden Fällen:
- Ich habe den falschen Artikel erhalten.
- Der Artikel entsprach nicht den Erwartungen (z. B. beschädigte Verpackung).
- Der Artikel wies Mängel auf.
- Überschreitung der Lieferzeit.
- Der Versender gestattet keine Warenprüfung vor der Bezahlung.
Die zurückgesendeten Produkte müssen sich in der Originalverpackung befinden, sicher verpackt, unbeschädigt und ungetragen sein. Das bedeutet, dass die Artikel zum Schutz während des Transports sicher in einem Karton verpackt sein müssen, idealerweise in demselben Karton, der für den Versand an Sie verwendet wurde.