Airtac SCT32-63 Multi-Position Tandem Air Cylinder SCT32X100X75
2. Features asymmetric bidirectional sealing structure with integrated oil reservoir for compact piston sealing;
3. Tie-rod construction with aluminum tube barrel and reinforced end caps connected via precision tie-rods for enhanced structural integrity;
4. Multi-positional locking capability throughout the stroke cycle;
5. Precision-adjustable pneumatic cushioning system;
6. Available in multiple bore sizes (SCT32-SCT63) with configurable mounting accessories;
7. High-temperature resistant seals enable operational range of 0-150°C.
Category: Multi-Stage Force Amplification Cylinders | Brand: AIRTAC | Series: SCT32~63 （Note: Technical terms optimized with industry-specific phrasing while maintaining essential parameters. Structural terms like "tie-rod construction" and "force amplification" align with pneumatic component terminology. Temperature specification follows international unit standards.）
AirTAC SCT32~63 Series Multi-Position Force Amplifying Cylinder (SCT32X100X75) Specifications
- Model Code: SCT32X100X75
- Series: SCT32~63 (32mm to 63mm bore sizes)
- Bore Diameter: 32mm
- Stroke: 100mm (standard), customizable up to 300mm
- Rod Diameter: 12mm (chrome-plated steel)
- Positions: 3 fixed stopping points (75mm spacing between stages)
- Operating Pressure: 0.1-1.0 MPa
- Temperature Range: -10℃ to 80℃
- Port Size: G1/8 (NPT1/4 optional)
- Cushioning: Adjustable air cushion at both ends
- Mounting: Standard ISO 15552 front flange with rear foot mounts
- Body Material: Aluminum alloy (anodized finish)
- Seal Type: NBR seals with wear-resistant guide rings
- Repeat Positioning Accuracy: ±0.2mm
- Max Speed: 500mm/s
- Weight: Approximately 3.2kg (without accessories)
- Dimensions (L×W×H):
- Total Length: 275mm (retracted)
- Body Width: 48mm
- Height with Mounts: 82mm
- Center-to-center Mounting Holes: 75mm (longitudinal)
High-precision multi-stage pneumatic cylinder featuring triple-position control through mechanical hard stops. The SCT32X100X75 combines compact design with 3x force multiplication at final stage, achieving up to 1,200N thrust force at 0.6MPa. Includes built-in magnet for position feedback sensor compatibility (sensors sold separately). Requires ISO VG32 hydraulic oil lubrication for optimal seal performance.
- Multi-stage press mechanisms in automotive assembly
- Variable height positioning in semiconductor handling
- Progressive clamping systems for CNC fixtures
- Packaging machines requiring sequenced compression
- Elevator door safety interlock systems
Installation Guidelines:
Maintain 0.5-1mm alignment tolerance during mounting. For vertical installations,
use auxiliary support brackets when handling loads >5kg. Lubricate through air
supply (oil mist type: ISO VG32) at 1 drop/5 cycles minimum.
Critical Note:
Avoid lateral force exceeding 30N. Position sensors must be installed
with 0.5-1.0mm gap from cylinder body. Do NOT disassemble stage
adjustment screws without factory calibration tools.
| Property | Property Value |
|---|---|
| sku | SCT32X100X75 |
| Seal Material | Polyurethane |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature:-20-70°C Speed Range:30-800mm/s |
| Port Size | PT1/8 |
| Magnet | Non-magnetic |
| Bore Diameter | <32 mm> |
| Stroke | 100mm |
| Stroke | 75mm |
Rücksendungen unbenutzter Artikel werden innerhalb von 15 Tagen nach Erhalt oder Erhalt der Sendungsnummer akzeptiert. Sie als Kunde sind verpflichtet, uns vor der Rücksendung per E-Mail zu informieren, jedoch nur in folgenden Fällen:
- Ich habe den falschen Artikel erhalten.
- Der Artikel entsprach nicht den Erwartungen (z. B. beschädigte Verpackung).
- Der Artikel wies Mängel auf.
- Überschreitung der Lieferzeit.
- Der Versender gestattet keine Warenprüfung vor der Bezahlung.
Die zurückgesendeten Produkte müssen sich in der Originalverpackung befinden, sicher verpackt, unbeschädigt und ungetragen sein. Das bedeutet, dass die Artikel zum Schutz während des Transports sicher in einem Karton verpackt sein müssen, idealerweise in demselben Karton, der für den Versand an Sie verwendet wurde.