Airtac SCT32-63 Multi-Position Tandem Air Cylinder SCT50X160X200S
2. Features asymmetric bidirectional sealing structure with integrated oil reservoir for compact piston sealing;
3. Tie-rod construction with aluminum tube barrel and reinforced end caps connected via precision tie-rods for enhanced structural integrity;
4. Multi-positional locking capability throughout the stroke cycle;
5. Precision-adjustable pneumatic cushioning system;
6. Available in multiple bore sizes (SCT32-SCT63) with configurable mounting accessories;
7. High-temperature resistant seals enable operational range of 0-150°C.
Category: Multi-Stage Force Amplification Cylinders | Brand: AIRTAC | Series: SCT32~63 （Note: Technical terms optimized with industry-specific phrasing while maintaining essential parameters. Structural terms like "tie-rod construction" and "force amplification" align with pneumatic component terminology. Temperature specification follows international unit standards.）
AirTAC SCT32~63 Series Multi-Position Force Amplifier Cylinder SCT50X160X200S Specifications
- Model: SCT50X160X200S (Standard Stroke)
- Series: SCT32~63 Multi-Position Force Amplifier
- Bore size: Ø50 mm
- Stroke: 160 mm (primary) + 200 mm (secondary)
- Working pressure: 0.1~0.8 MPa
- Temperature range: -20℃ to 80℃
- Piston speed: 50~700 mm/s
- Buffer type: Adjustable rubber cushion
- Mounting style: MF1 front flange / MB1 rear flange (standard)
- Port size: G3/8 (dual ports at both ends)
- Rod thread: M20×1.5 (external)
- Cylinder material: Aluminum alloy barrel with hard anodizing
- Seal material: NBR (nitrile rubber)
- Weight: 6.8 kg (with standard accessories)
- Dimensions: 510mm(L) × 80mm(W) × 80mm(H) (max extended length)
- Position accuracy: ±0.2 mm (with mechanical stops)
- Maximum lateral load: 250 N at rod end
High-precision multi-stage pneumatic cylinder featuring dual-piston amplification technology for 2.5x standard force output (up to 1,570N at 0.6MPa). Integrated mechanical stops enable 3 programmable positions (extend/retract/mid-stroke). Corrosion-resistant construction with IP54 protection rating. Requires ISO 8573-1:2010 Class 3 lubricated air (ISO VG32 turbine oil recommended).
- Automated press-fit systems for electronics assembly
- Clamping fixtures in CNC machining centers
- Vertical lifting mechanisms in packaging lines
- Precision alignment stages in optical equipment
- Composite material compression molding
Installation note:
Maintain 0.05mm/m alignment tolerance during mounting. For multi-position setups,
use M6×12 mounting screws (Grade 8.8 or higher) with 18-22 Nm torque.
Allow 50mm clearance behind rear port for maintenance access.
| Property | Property Value |
|---|---|
| sku | SCT50X160X200S |
| Seal Material | Polyurethane |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature:-20-70°C Speed Range:30-800mm/s |
| Port Size | PT1/4 |
| Magnet | S-Magnetic |
| Bore Diameter | <50mm> |
| Stroke | 160mm |
| Stroke | <200mm> |
Rücksendungen unbenutzter Artikel werden innerhalb von 15 Tagen nach Erhalt oder Erhalt der Sendungsnummer akzeptiert. Sie als Kunde sind verpflichtet, uns vor der Rücksendung per E-Mail zu informieren, jedoch nur in folgenden Fällen:
- Ich habe den falschen Artikel erhalten.
- Der Artikel entsprach nicht den Erwartungen (z. B. beschädigte Verpackung).
- Der Artikel wies Mängel auf.
- Überschreitung der Lieferzeit.
- Der Versender gestattet keine Warenprüfung vor der Bezahlung.
Die zurückgesendeten Produkte müssen sich in der Originalverpackung befinden, sicher verpackt, unbeschädigt und ungetragen sein. Das bedeutet, dass die Artikel zum Schutz während des Transports sicher in einem Karton verpackt sein müssen, idealerweise in demselben Karton, der für den Versand an Sie verwendet wurde.