Airtac SCT32-63 Multi-Position Tandem Air Cylinder SCT50X170X250S
2. Features asymmetric bidirectional sealing structure with integrated oil reservoir for compact piston sealing;
3. Tie-rod construction with aluminum tube barrel and reinforced end caps connected via precision tie-rods for enhanced structural integrity;
4. Multi-positional locking capability throughout the stroke cycle;
5. Precision-adjustable pneumatic cushioning system;
6. Available in multiple bore sizes (SCT32-SCT63) with configurable mounting accessories;
7. High-temperature resistant seals enable operational range of 0-150°C.
Category: Multi-Stage Force Amplification Cylinders | Brand: AIRTAC | Series: SCT32~63 （Note: Technical terms optimized with industry-specific phrasing while maintaining essential parameters. Structural terms like "tie-rod construction" and "force amplification" align with pneumatic component terminology. Temperature specification follows international unit standards.）
AirTAC SCT32~63 Series Multi-Position Tandem Cylinder SCT50X170X250S Specifications
- Model Code: SCT50X170X250S
- Bore Size: Ø50mm (SCT32~63 series)
- Stroke Configuration: 170mm (primary) + 250mm (secondary)
- Total Stroke: 420mm (combined)
- Operating Pressure: 0.05-0.9 MPa
- Piston Speed: 50-800 mm/s
- Mounting Style: Fixed MF1 type with front flange
- Cushioning: Adjustable rubber buffer (both ends)
- Ambient Temperature: -20℃ to 80℃
- Seal Material: NBR with wear-resistant ring
- Rod Material: Hard chrome-plated carbon steel
- Tube Material: Aluminum alloy oxidation finish
- Weight: 4.8kg (without accessories)
- Dimensions (L×W×H):
- Retracted: 420mm × 80mm × 80mm
- Extended: 840mm × 80mm × 80mm
High-precision multi-stage positioning cylinder with tandem piston design, featuring dual magnetic sensors (sensor slots on both cylinders). The staggered port design (G1/4) enables flexible piping configurations. Requires ISO 8573-1:2010 class 4 compressed air with lubrication (ISO VG32 recommended).
- Automated material handling with intermediate stops
- Press-fit operations requiring variable force stages
- Palletizing robots with position-dependent grip adjustments
- Electronics assembly with multi-height positioning
- Plastic injection molding ejection systems
Installation protocol:
Align within 0.2mm/m perpendicularity tolerance. Use M6×20 mounting screws
(35N·m torque limit). Allow 15mm clearance for sensor cable routing. Perform
low-speed run-in (≤200mm/s) for first 50 cycles.
| Property | Property Value |
|---|---|
| sku | SCT50X170X250S |
| Seal Material | Polyurethane |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature:-20-70°C Speed Range:30-800mm/s |
| Port Size | PT1/4 |
| Magnet | S-Magnetic |
| Bore Diameter | <50mm> |
| Stroke | 170mm |
| Stroke | <250MM> → <250mm> |
Rücksendungen unbenutzter Artikel werden innerhalb von 15 Tagen nach Erhalt oder Erhalt der Sendungsnummer akzeptiert. Sie als Kunde sind verpflichtet, uns vor der Rücksendung per E-Mail zu informieren, jedoch nur in folgenden Fällen:
- Ich habe den falschen Artikel erhalten.
- Der Artikel entsprach nicht den Erwartungen (z. B. beschädigte Verpackung).
- Der Artikel wies Mängel auf.
- Überschreitung der Lieferzeit.
- Der Versender gestattet keine Warenprüfung vor der Bezahlung.
Die zurückgesendeten Produkte müssen sich in der Originalverpackung befinden, sicher verpackt, unbeschädigt und ungetragen sein. Das bedeutet, dass die Artikel zum Schutz während des Transports sicher in einem Karton verpackt sein müssen, idealerweise in demselben Karton, der für den Versand an Sie verwendet wurde.