Airtac SCT32-63 Multi-Position Tandem Air Cylinder SCT50X35X65S
2. Features asymmetric bidirectional sealing structure with integrated oil reservoir for compact piston sealing;
3. Tie-rod construction with aluminum tube barrel and reinforced end caps connected via precision tie-rods for enhanced structural integrity;
4. Multi-positional locking capability throughout the stroke cycle;
5. Precision-adjustable pneumatic cushioning system;
6. Available in multiple bore sizes (SCT32-SCT63) with configurable mounting accessories;
7. High-temperature resistant seals enable operational range of 0-150°C.
Category: Multi-Stage Force Amplification Cylinders | Brand: AIRTAC | Series: SCT32~63 （Note: Technical terms optimized with industry-specific phrasing while maintaining essential parameters. Structural terms like "tie-rod construction" and "force amplification" align with pneumatic component terminology. Temperature specification follows international unit standards.）
AirTAC SCT Series Multi-Position Force Amplifying Cylinder SCT50X35X65S Specifications
- Model: SCT50X35X65S
- Bore size: 50 mm
- Stroke: 35 mm
- Effective force output: 1,960 N @ 0.63 MPa
- Operating pressure: 0.05–0.8 MPa
- Positioning accuracy: ±0.5 mm
- Buffer type: Adjustable pneumatic cushioning
- Mounting style: MAL/MNB series standard (ISO 15552 compatible)
- Rod end type: Female thread M16×1.5
- Operating temperature: -20℃ to 80℃
- Seal material: NBR (Nitrile rubber)
- Body material: Aluminum alloy (hard anodized)
- Port size: 1/4" NPT (G1/8 optional)
- Weight: 3.8 kg (bare cylinder)
- Dimensions: 65mm (H) × 50mm (Bore Ø) × 240mm (Total extended length)
- Repeat positioning cycles: ≥500,000 (under rated conditions)
- Lubrication: Pre-lubricated (Oil-free operation possible)
High-precision multi-stage force amplifier cylinder featuring synchronized dual-piston design for parallel force output. The SCT50X35X65S delivers 3× standard cylinder force through mechanical leverage, with built-in position sensors (optional) for real-time feedback. Its modular structure allows cascade connection for multi-point force applications.
- Automotive part press-fitting systems
- PCB lamination presses
- Battery cell compression testing
- Composite material molding
- Precision stamping with progressive dies
- Robotic deburring force control
Installation note:
Requires rigid mounting surface (flatness ≤0.1mm/m) and alignment within 0.2° angular tolerance.
For vertical installations, use auxiliary guide rods. Lubricate sliding surfaces with ISO VG32 hydraulic oil
if operating below -10℃.
| Property | Property Value |
|---|---|
| sku | SCT50X35X65S |
| Seal Material | Polyurethane |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature:-20-70°C Speed Range:30-800mm/s |
| Port Size | PT1/4 |
| Magnet | S-Magnetic |
| Bore Diameter | <50mm> |
| Stroke | 35mm |
| Stroke | 65mm |
Rücksendungen unbenutzter Artikel werden innerhalb von 15 Tagen nach Erhalt oder Erhalt der Sendungsnummer akzeptiert. Sie als Kunde sind verpflichtet, uns vor der Rücksendung per E-Mail zu informieren, jedoch nur in folgenden Fällen:
- Ich habe den falschen Artikel erhalten.
- Der Artikel entsprach nicht den Erwartungen (z. B. beschädigte Verpackung).
- Der Artikel wies Mängel auf.
- Überschreitung der Lieferzeit.
- Der Versender gestattet keine Warenprüfung vor der Bezahlung.
Die zurückgesendeten Produkte müssen sich in der Originalverpackung befinden, sicher verpackt, unbeschädigt und ungetragen sein. Das bedeutet, dass die Artikel zum Schutz während des Transports sicher in einem Karton verpackt sein müssen, idealerweise in demselben Karton, der für den Versand an Sie verwendet wurde.