Airtac SCT32-63 Multi-Position Tandem Air Cylinder SCT50X40X20S
2. Features asymmetric bidirectional sealing structure with integrated oil reservoir for compact piston sealing;
3. Tie-rod construction with aluminum tube barrel and reinforced end caps connected via precision tie-rods for enhanced structural integrity;
4. Multi-positional locking capability throughout the stroke cycle;
5. Precision-adjustable pneumatic cushioning system;
6. Available in multiple bore sizes (SCT32-SCT63) with configurable mounting accessories;
7. High-temperature resistant seals enable operational range of 0-150°C.
Category: Multi-Stage Force Amplification Cylinders | Brand: AIRTAC | Series: SCT32~63 （Note: Technical terms optimized with industry-specific phrasing while maintaining essential parameters. Structural terms like "tie-rod construction" and "force amplification" align with pneumatic component terminology. Temperature specification follows international unit standards.）
AirTAC SCT32~63 Multi-Position Force Amplifier Cylinder SCT50X40X20S Specifications
- Series: SCT32~63 Force Amplifier Series
- Full Model: SCT50X40X20S
- Bore Size: Ø50mm (Standard SCT series)
- Stroke Configuration: Dual-stage 40mm + 20mm (Total 60mm stroke)
- Operating Pressure: 0.1~0.8 MPa
- Maximum Output Force: 1,570N at 0.6MPa (Calculated value)
- Temperature Range: -20℃ to 80℃
- Port Size: G1/8 (Standard) / Optional NPT1/4
- Piston Material: Hard anodized aluminum alloy
- Rod Material: Chrome-plated steel
- Seal Type: Multi-lip NBR seals with wear indicator
- Cushioning: Adjustable air cushion at both ends
- Weight: 3.2kg ±5% (Without accessories)
- Dimensions: 178mm(L) × 62mm(W) × 62mm(H) (Fully retracted)
- Mounting: ISO 15552 standard mounting pattern
- Repeat Positioning Accuracy: ±0.2mm
- Protection Class: IP54 (Standard) / IP67 (Optional)
Multi-chamber force amplifier cylinder featuring progressive force multiplication through three pressure chambers. The SCT50X40X20S variant delivers 3-stage positioning with intermediate force control, utilizing AirTAC's patented pressure cascade technology. Requires filtered lubricated air (40μm filter, ISO 8573-1 class 4) for optimal performance.
- Press-fit operations in electronic component assembly
- Progressive clamping systems for CNC fixtures
- Multi-stage compression molding machines
- Automated battery cell stacking equipment
- Precision glass lamination processes
Installation note:
Requires horizontal mounting orientation with ±2° tolerance. Allow minimum 50mm
clearance at rod end for thermal expansion. Pre-lubricate with ISO VG32 hydraulic oil
during initial installation. Perform force calibration every 50,000 cycles.
Critical parameters:
Maximum side load 15N·m / Maximum piston speed 500mm/s /
Do not use with rotary motions exceeding 30RPM
| Property | Property Value |
|---|---|
| sku | SCT50X40X20S |
| Seal Material | Polyurethane |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature:-20-70°C Speed Range:30-800mm/s |
| Port Size | PT1/4 |
| Magnet | S-Magnetic |
| Bore Diameter | <50mm> |
| Stroke | <40mm> |
| Stroke | <20mm> |
Rücksendungen unbenutzter Artikel werden innerhalb von 15 Tagen nach Erhalt oder Erhalt der Sendungsnummer akzeptiert. Sie als Kunde sind verpflichtet, uns vor der Rücksendung per E-Mail zu informieren, jedoch nur in folgenden Fällen:
- Ich habe den falschen Artikel erhalten.
- Der Artikel entsprach nicht den Erwartungen (z. B. beschädigte Verpackung).
- Der Artikel wies Mängel auf.
- Überschreitung der Lieferzeit.
- Der Versender gestattet keine Warenprüfung vor der Bezahlung.
Die zurückgesendeten Produkte müssen sich in der Originalverpackung befinden, sicher verpackt, unbeschädigt und ungetragen sein. Das bedeutet, dass die Artikel zum Schutz während des Transports sicher in einem Karton verpackt sein müssen, idealerweise in demselben Karton, der für den Versand an Sie verwendet wurde.