Airtac 200M Solenoid Valve Base 200M-14F
Genuine AirTAC valve manifold, order code 200M-14F from the 4AM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Manifold200M (for 4A200)
- Stations14 stations
- ThreadPT
- Models100M / 200M / 300M / 400M
- For valves4A100 / 4A200 / 4A300 / 4A400
- Maximum stations16 / 16 / 12 / 8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 200M Solenoid Valve Base 200M-14F
Fourteen 4A200 valves can sit side by side on this 200M bank, drawing air from one supply port and venting through one exhaust, which saves piping and makes fault tracing straightforward. The order code ends without a G or T letter, so every port is cut to PT thread.
With fourteen stations the body length A reaches 44 mm plus 23 mm for each of the thirteen added stations, i.e. 343 mm. Supply port P measures 1/4 inch; air must be filtered to 40 um and temperatures may run from -20 to +70 C. Manifold, seals and screws ship together as one order, and any station left without a valve is closed by the separately ordered P-200M-R2 blank plate kit.
Airtac 200M Solenoid Valve Base 200M-14F Technical Specifications
| Order code | 200M-14F |
|---|---|
| Product | Valve Manifold |
| Manifold | 200M (for 4A200) |
| Stations | 14 stations |
| Thread | PT |
| Models | 100M / 200M / 300M / 400M |
|---|---|
| For valves | 4A100 / 4A200 / 4A300 / 4A400 |
| Maximum stations | 16 / 16 / 12 / 8 |
| Supply port P | 1/4" / 1/4" / 3/8" / 1/2" |
| Length A | 100M 38 + 19 × (n-1) mm; 200M 44 + 23 × (n-1) mm; 300M 52 + 28 × (n-1) mm; 400M 61 + 35 × (n-1) mm |
| Fluid | Air, filtered to 40 µm |
| Temperature | -20 to +70 °C |
| Included | Manifold, seals and screws |
| Blank plate | Kit P-□00M-R2 (separate) |
Source: AirTAC 4A manifold datasheet (p.124), ordering code, specifications and dimensions.
How to choose
Step up from 200M-13F or down from 200M-15F to this code when fourteen 4A200 valves, or fewer plus blank plates, share one bank; the 200M series accepts up to 16 stations, so 200M-16F is the largest sibling. The 23 mm per-station pitch fits 4A200 bodies, while a 300M bank uses 28 mm spacing and a larger 3/8 inch supply port.
Applications
Sorter gate control in warehouses
Drive the 4A200 valves that open gates and stoppers across fourteen sorting positions, all supplied through the single 1/4 inch port.
Central valve bench for test rigs
Mount fourteen valves on one 343 mm bank so pressure settings and fault checks happen at a single accessible point.
Coordinated gripper and presenter circuits
Feed the cylinders that time grippers and part presenters in an automation cell through one shared supply and exhaust.
FAQ
What are the key figures of the 200M-14F?
Fourteen stations for 4A200 valves, PT thread (no G or T in the code), 1/4 inch supply port P, length A of 343 mm (44 mm plus 23 mm per extra station), series maximum of 16 stations, air filtered to 40 um, and -20 to +70 C.
How does the 200M-14F differ from smaller 200M banks?
Only the station count changes within the 200M series: each added station lengthens the body by 23 mm, so thirteen stations give 320 mm and fifteen give 366 mm. Thread, port size and included hardware stay the same, and spare stations still take the P-200M-R2 blank plate.