Airtac 200M Solenoid Valve Base 200M-16F
Genuine AirTAC valve manifold, order code 200M-16F from the 4AM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Manifold200M (for 4A200)
- Stations16 stations
- ThreadPT
- Models100M / 200M / 300M / 400M
- For valves4A100 / 4A200 / 4A300 / 4A400
- Maximum stations16 / 16 / 12 / 8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 200M Solenoid Valve Base 200M-16F
As the fully populated member of the 200M family, the 200M-16F joins sixteen 4A200 air-piloted valves into one bank with a shared air supply and shared exhaust, so faults are easier to trace and one 1/4 inch supply port P feeds the whole assembly. The thread field of the order code is left blank, which the ordering table defines as PT threads.
At sixteen stations the body measures 389 mm, following the family formula of 44 mm for the first station plus 23 mm for each additional one, so check the available mounting face before ordering. AirTAC includes the manifold, seals and screws; the fluid must be air filtered to 40 um and the temperature range is -20 to +70 C.
Airtac 200M Solenoid Valve Base 200M-16F Technical Specifications
| Order code | 200M-16F |
|---|---|
| Product | Valve Manifold |
| Manifold | 200M (for 4A200) |
| Stations | 16 stations |
| Thread | PT |
| Models | 100M / 200M / 300M / 400M |
|---|---|
| For valves | 4A100 / 4A200 / 4A300 / 4A400 |
| Maximum stations | 16 / 16 / 12 / 8 |
| Supply port P | 1/4" / 1/4" / 3/8" / 1/2" |
| Length A | 100M 38 + 19 × (n-1) mm; 200M 44 + 23 × (n-1) mm; 300M 52 + 28 × (n-1) mm; 400M 61 + 35 × (n-1) mm |
| Fluid | Air, filtered to 40 µm |
| Temperature | -20 to +70 °C |
| Included | Manifold, seals and screws |
| Blank plate | Kit P-□00M-R2 (separate) |
Source: AirTAC 4A manifold datasheet (p.124), ordering code, specifications and dimensions.
How to choose
Choose 200M-16F when you need the maximum capacity of the 200M range, which tops out at sixteen stations just like the 100M, while the 300M stops at twelve and the 400M at eight. If your valves are 4A100, 4A300 or 4A400, order 100M, 300M or 400M instead. Smaller banks use 200M-1F through 200M-15F, and a G or T code ending selects G or NPT threads in place of this blank-coded PT version.
Applications
Multi-circuit assembly lines
Group the sixteen 4A200 valves driving clamps, chutes and ejectors into one compact bank instead of piping sixteen individually plumbed valves.
Central valve cabinets
A single 1/4 inch supply port and one shared exhaust keep cabinet plumbing short and make station-by-station fault tracing straightforward.
Packaging machine retrofits
Replace scattered 4A200 valves along a packaging line with a 389 mm long valve bank that shares one supply connection.
FAQ
Which valves and threads suit the 200M-16F?
It carries sixteen 4A200 series valves, one per station. Threads are PT because the thread field of the order code is blank; G or NPT require the G or T ending.
What are the key figures of this code in one place?
Sixteen stations, length A 389 mm (44 mm for the first station plus 23 mm per extra station), supply port P 1/4 inch, fluid air filtered to 40 um, temperature -20 to +70 C. Seals and screws are included; blank plate kit P-200M-R2 is ordered separately if any station must be closed.