AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F)
The AirTAC AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port size1/8 in
- Coil voltageAC220V
- Electrical entryDIN plug (DIN socket type)
- Stations10
- Series3V1
About the AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F)
3V106A10F is a ready-built manifold assembly: ten AirTAC 3V1 valves, each a direct-acting 3/2 with spring return and a 1/8in PT port, mounted in series on a shared base. Instead of piping ten separate valves, you get one compact block that saves panel space. Every station carries its own AC220V coil at 4.5 VA and its own manual override for commissioning function by function.
Each 3/2 section has supply, outlet and exhaust, so it feeds or vents a single line - single-acting cylinders, blow nozzles, clamps or a pilot signal. AirTAC manifold bases for 3V1 accept 1 to 20 stations, so future expansion only means ordering the next station count.
AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F) Technical Specifications
| Model | AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F) |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 4.5 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F)
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 10F | 10 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F) Is Used
Nozzle bank on a food-packaging line
Ten stations fire short air jets to clear crumbs and film trim from trays, all fed from one manifold connection instead of ten individually plumbed valves.
Clamp array on an assembly cell
Each station controls one single-acting hold-down on a multi-part fixture, so operators can commission and override clamps one position at a time.
Pilot manifold on a compressor skid
One 4.5 VA AC220V coil per station sends pilot signals to larger process valves while the shared base keeps skid wiring and piping short.
Is the AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F) the Right Part?
A ten-station 3V1 bank suits jobs where many small single-line functions share one panel and one air feed. Remember that 3V1 publishes no Cv figure, so if any station needs real flow, check with us or step that line up: 3V2 offers 1/8in and 1/4in ports with NC or NO selection, Cv 0.18-0.19 and a vacuum rating, while 3V3 gives 1/4in and Cv 0.62. 3V2M is the alternative when manifold density matters more than flow per station. Double-acting cylinders need a 5-port valve - the AirTAC 4V series - not this 3/2 body. Confirm the five match points before ordering: port (M5 or 1/8in), thread (PT standard; G and NPT to order), coil voltage, DIN plug versus flying-lead entry, and the station count (1F to 20F).
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F) FAQ
Every station is a 3/2 direct-acting spring-return valve: pressure 0-0.8 MPa (0-114 psi), temperature -20 to 70 C, IP65 (DIN 40050) protection. The AC220V coil takes 4.5 VA (the 3V1 family also runs AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W). No Cv or effective area is published for 3V1.
Yes. AirTAC builds 3V1 series manifolds from 1F to 20F - 1 to 20 valves on one base - so you can order 3V106A6F, 3V106A10F, 3V106A16F and so on to match the panel. Individual 3V1 valves and the accessory sets (3V1-P30, 3V1-P31, 3V1-P32) are listed separately.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC 3V106A-10 Solenoid Valve, 3V1 Series (3V106A10F)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.