Airtac 3V1 Solenoid Valve 3V1M5FI10F
The AirTAC Airtac 3V1 Solenoid Valve 3V1M5FI10F is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port sizeM5
- Coil voltageDC12V
- Electrical entryFlying lead (lead-out wire type)
- Stations10
- Series3V1
About the Airtac 3V1 Solenoid Valve 3V1M5FI10F
Ten 3V1 valves ganged in series on a single base: that is what the 10F suffix in 3V1M5FI10F gives you. Each position is a direct-acting 3/2-way, single-solenoid, spring-return valve that feeds or vents one line, so the assembly suits banks of single-acting cylinders, sequenced blow pulses or pilot signals. The manifold arrangement replaces ten separately plumbed bodies and their fittings with one block, freeing panel space.
Every station runs an M5 port and a DC12V coil rated at 2.5 W, with flying leads (lead-out wires) per position for direct hookup to your PLC or relay board. The series is built from 1 to 20 stations, so a 10-station assembly like this can be resized in a redesign, and IP65 (DIN 40050) coil protection holds across the whole bank. Every unit supplied by AirtacDistr is factory-original AirTAC.
Airtac 3V1 Solenoid Valve 3V1M5FI10F Technical Specifications
| Model | Airtac 3V1 Solenoid Valve 3V1M5FI10F |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | M5 |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | Flying lead (lead-out wire type) |
| Coil power | 2.5 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V1 Solenoid Valve 3V1M5FI10F
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| I | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 10F | 10 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V1 Solenoid Valve 3V1M5FI10F Is Used
Bottling-line stoppers
Drives ten spring-return stopper cylinders along a bottling conveyor from one manifolded block, replacing ten separate valves and their fitting sets.
Fixture clamping bank
Sequences clamping jaws on a compact machining fixture, each M5 position piped to a single-acting clamp fed at up to 0.8 MPa.
Packaging diverters
Flicks pneumatic diverter fingers on a small packaging conveyor, with flying leads landing directly on the machine's PLC relay terminals.
Is the Airtac 3V1 Solenoid Valve 3V1M5FI10F the Right Part?
Because AirTAC publishes no Cv for the 3V1 body, treat this manifold as a low-flow, low-power solution and check duty flow with us where it matters. A single 3V2 valve (1/8in or 1/4in, NC or NO selectable, Cv 0.18-0.19, vacuum rated) or a 3V3 (1/4in, Cv 0.62) moves more air per port; the 3V2M family is the alternative when manifold density, not flow, is the priority. Double-acting cylinders are out of scope here - the 5-port AirTAC 4V series covers them.
Your five checks for this SKU: M5 port; thread - no separate thread code applies at M5, while on 1/8in 3V1 bodies PT is standard with G and NPT available to order; DC12V coil; flying-lead entry; and the 10-station manifold count. The medium must be air filtered to 40 um or finer, and lubrication is not required.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V1 Solenoid Valve 3V1M5FI10F FAQ
Operating pressure is 0-0.8 MPa (0-114 psi) and temperature range is -20 to 70 C. Coil power by voltage: AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W - this SKU uses DC12V at 2.5 W per station. Protection is IP65 (DIN 40050). No flow coefficient (Cv) or effective area is published for the 3V1 series.
Yes. AirTAC builds the 3V1 manifold from 1F to 20F, meaning 1 to 20 valves in series on one base, so a 10-station assembly can be re-ordered as a 3F, 8F or 20F build with the same M5 ports, DC12V coils and flying leads. Each position keeps its manual override for installation and commissioning.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 3V1 Solenoid Valve 3V1M5FI10F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.