Airtac 3V100 Solenoid Valve 3V110M5NOA
The AirTAC Airtac 3V100 Solenoid Valve 3V110M5NOA is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally open
- Port sizeM5
- Coil voltageAC220V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110M5NOA
The 3V110M5NOA is a genuine AirTAC 3/2 solenoid valve from the 3V1 series, configured normally open with an M5 port, an AC220V coil and DIN plug entry. In its rest state the outlet is connected to supply; energise the coil and the outlet vents instead. That makes it the natural pick where a mains-powered panel must let air through - or let it escape - whenever the control circuit is dead. The M5 thread is the smallest in the family and suits compact single-acting actuators, fine blow-off tips and pilot lines.
Across the 3V1 family the same body is offered normally closed as well, with AC220V, DC24V, AC110V, AC24V or DC12V coils, a flying-lead entry option, and 3V100M manifold bases from 1F to 20F stations. We do not publish pressure, flow or coil-power values here because those datasheet figures are not in our hands; ask and we will confirm them for your circuit.
Airtac 3V100 Solenoid Valve 3V110M5NOA Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110M5NOA |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally open |
| Port size | M5 |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110M5NOA
| 3V110 | Body. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NO | Normally open: air passes until the coil is energised. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110M5NOA Is Used
Venting a pneumatic gate on a water treatment skid
The normally open function holds a spring-return gate actuator fed from the mains panel; when the coil energises, the actuator vents and the gate drops to its safe position.
Fail-vent on a textile machine
Loom air jets stay live while the machine sits stopped at the panel; an emergency stop energises the coil and vents the jet circuit, taking pressure off the nozzles.
Tipping-gear test bench in a truck depot
Fed from workshop mains at 220V AC, the normally open valve keeps a spring-return tipping cylinder raised during leak checks and vents it to lower the body when the test ends.
Is the Airtac 3V100 Solenoid Valve 3V110M5NOA the Right Part?
Start with the AC220V coil: it is wound for a 220V AC supply and nothing else, so check the panel before ordering - a coil cannot be converted to another voltage by rewiring. Entry is a DIN plug, which keeps the panel wiring tidy but means ordering a socket connector with the valve. On state, normally open leaves the outlet fed whenever the coil is off, the fail-vent choice; normally closed is available in the same family for the opposite behaviour. The M5 port is the smallest step; single-acting cylinders with larger bores want the 06 (1/8 inch), 08 (1/4 inch) or 10 (3/8 inch) bodies. If several valves share a cabinet, a 3V100M manifold base gives them one air feed and one wiring loom. Sizing is the open question - flow figures for this family are not ours to quote - so have us check the valve against your actuator first. If published flow and coil power are a requirement today, the documented 3V2 (1/8 inch and 1/4 inch) and 3V3 (1/4 inch) bodies state them, and a double-acting cylinder calls for the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110M5NOA FAQ
Yes - raise an RFQ and we will come back with the operating pressure, flow and coil power taken from the AirTAC datasheet for this family. Buyers who need such figures printed on the product page right now are better served by the documented AirTAC 3V2 and 3V3 3-port bodies.
It switches air to single-acting (spring-return) cylinders, blow nozzles, clamps, suction generators and pilot lines - one supply port, one outlet, one exhaust. It will not run a double-acting cylinder, which needs both a feed and an exhaust for each chamber; that job belongs to a 5-port valve such as the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110M5NOA
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.