
The AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008A-AM) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. Its published figures are confirmed from the AirTAC datasheet on request.
A 3/2 solenoid valve has one job: feed the outlet from supply, or cut the outlet and let it dump to exhaust. The 3V22008A-AM does that through a 1/4in PT port with an AC220V coil on a DIN plug entry - the everyday combination for a fixed panel running mains control, where the plug top keeps coil wiring and replacement tidy.
It is a genuine AirTAC part. Elsewhere in the 3V1 / 3V2 / 3V3 family you will find the other state, the other voltages (DC24V, AC110V, AC24V, DC12V), flying-lead entries and the 3V-F manifold bases. Datasheet figures for pressure, flow and coil power are not listed here; ask on the RFQ and our engineers will confirm them with you before the order is placed.
| Model | AirTAC 3V220-08 Solenoid Valve, 3V200 Series (3V22008A-AM) |
|---|---|
| Series | 3V220 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
| 3V220 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT is standard; G and NPT are available to order. |
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Controls the single-acting cylinder that lowers the sealing head onto a bag on a packaging line.
Energises the clamp cylinder on a weld jig so the bracket is held square while the tack welds go in.
Dumps a single-acting actuator to exhaust the moment a machine cycle finishes, letting its spring retract the rod.
What is decodable here: a 1/4in PT port, an AC220V coil and a DIN plug entry. The coil has to be ordered to the supply you actually have - an AC220V solenoid cannot be converted to 110V or 24V by rewiring - and the DIN plug means you seat a plug top with your own leads rather than flying wires. The 1/4in port gives more headroom than 1/8in for a larger spring-return actuator; PT is the manufacturer-standard thread, with G and NPT as order options. Sizing is the one thing we will not guess: there are no published flow figures for this body on our side, so let us check it against your cylinder through the RFQ. Where a fully documented 3-port valve is wanted now, the 3V2 (1/8in and 1/4in) and 3V3 (1/4in) bodies carry published flow and coil-power figures, and the AirTAC 4V series handles double-acting cylinders.
Confirm before you order
Yes. Pressure range, flow, coil power and protection details all come from the manufacturer datasheet, and we will go through it with you when your RFQ arrives. If a published specification sheet is a must-have before you enquire, the 3V2 and 3V3 series are the documented options.
Single-acting spring-return cylinders, on/off air blow, clamping fixtures, suction-cup switching and the pilot stage of larger valves. It cannot stroke a double-acting cylinder - that takes a 5-port valve such as the AirTAC 4V range.
Genuine AirTAC parts produced by the AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.