Airtac 3V2M Solenoid Valve 3V2MNCBI-9F
2、Coaxial shut-off design ensures excellent sealing performance and high flow capacity; Requires no oil lubrication;
3、Equipped with manual override for simplified installation and commissioning;
4、Modular design with base mount enables multi-valve integration for space-saving configurations;
5、Centralized air supply and integrated wiring streamline troubleshooting during fault diagnosis;
6、Flexible and scalable configuration supports arbitrary combinations or expansion of valve quantities/types;
7、Dedicated base gasket design – Flipping the gasket does not allow NC/NO conversion.
Category: Solenoid Valves , Brand: AirTAC , Series: 3V2M
AirTAC 3V2MNCBI-9F Solenoid Valve Technical Details
- Full model designation: 3V2MNCBI-9F
- Valve type: 3/2-way normally closed (pilot-operated)
- Port configuration: PT1/8 (G1/8 thread standard)
- Effective bore diameter: 2.5mm
- Operating pressure range: 0.15–0.8 MPa (21.7–116 PSI)
- Voltage variants: DC12V/24V ±10%, AC110V/220V ±10% 50/60Hz
- Response time: ≤20ms (at rated voltage)
- Flow rate: 750 L/min (ANR) at 0.5MPa
- Seal material: HNBR rubber (superior to standard NBR in oil resistance)
- Ambient temperature: -5℃ to 60℃ (with no condensation)
- Fluid temperature: 0℃ to 60℃
- Power consumption: 1.6W (DC), 2.2VA (AC)
- Insulation class: Class B (130℃)
- Protection rating: IP67 (dust tight & temporary immersion protected)
- Housing material: Reinforced PBT with UL94 V-0 flame rating
- Weight: 180g ±5g (without connector)
- Dimensions: 50mm(L) × 35mm(W) × 65mm(H) (excluding mounting tabs)
This high-cycle valve features a dual-coil suppression system for reduced EMI emissions and a copper-free aluminum alloy body for improved corrosion resistance in humid environments. The optimized pilot chamber design enables stable operation even with fluctuating supply pressures. Requires 5μm filtered air with max 40% relative oil content (ISO 8573-1:2010 Class 4.4.3).
- Sequential control in plastic injection molding machines
- Pneumatic clamping systems for CNC fixtures
- Beverage filling line manifold assemblies
- Sterilization equipment in pharmaceutical production
- High-cycle textile loom air jet controls
Maintenance protocol:
Perform monthly manual override tests using the built-in pushbutton.
When used in dusty environments, install a 20μm pre-filter and replace
every 2,000 operating hours. Avoid mounting near high-frequency inverters
(min. 50cm distance recommended).
| Property | Property Value |
|---|---|
| sku | 3V2MNCBI-9F |
| Position | 3-Port 2-Position |
| Initial Position | Normally Closed |
| Standard Voltage | DC24V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.