Airtac 3V2M Solenoid Valve 3V2MNCF-13F
The AirTAC Airtac 3V2M Solenoid Valve 3V2MNCF-13F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageDC12V
- Electrical entryDIN plug (DIN socket type)
- Stations13
- Flow (Cv)0.1
- Series3V2M
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 3V2M Solenoid Valve 3V2MNCF-13F
The 3V2MNCF-13F packs thirteen normally closed 3/2 valves onto one AirTAC base, all direct-acting, single-solenoid and spring return, with a coaxial shut-off poppet that seals well cycle after cycle. Ports are PT1/8 and the flow coefficient per station is Cv 0.1. Nothing moves to the outlet until the relevant 12 V coil is energised.
Thirteen separately plumbed valves can be slow to troubleshoot; here, one shared supply and one wiring run mean a dead circuit is traced station by station in minutes, and different valve types can sit side by side on the same manifold. Budget 13 x 7.0 W = 91 W for a fully energised bank, about 7.6 A at 12 V. The exhaust is centralised, leaving through a common base port.
Airtac 3V2M Solenoid Valve 3V2MNCF-13F Technical Specifications
| Model | Airtac 3V2M Solenoid Valve 3V2MNCF-13F |
|---|---|
| Series | 3V2M |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Initial state | Normally closed |
| Item form | Complete assembly — 13 valves on a shared base |
| Exhaust | Centralised exhaust |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 7.0 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Cv 0.1 |
| Temperature | -20 to 70 C |
| Construction | Coaxial shut-off (poppet), base-mounted, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V2M catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V2M Solenoid Valve 3V2MNCF-13F
| 3V2M | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 13F | 13 stations in one assembly, centralised exhaust. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V2M Solenoid Valve 3V2MNCF-13F Is Used
Bottling line fill-head clamp array
Thirteen spring-return clamps grip fill heads on a rotary bottler; each NC station vents to the safe open state the moment its coil drops out.
Calibration fixture pilot switching
A metrology bench uses isolated 3/2 channels to switch pilot air to one gauge circuit at a time without cross-bleeding between stations.
Lab autoclave door interlocks
Normally closed valves hold interlock latches released only while powered, so a control failure leaves every door free to return to its safe state.
Is the Airtac 3V2M Solenoid Valve 3V2MNCF-13F the Right Part?
This code fixes five choices for you: NC state, DC12V coils, DIN plug entry, a 13-station base and centralised exhaust. Thread is PT by default, with G and NPT available to order.
If any single station needs more than Cv 0.1, mount an individual 3V2 beside the bank (Cv 0.18 at 1/8 inch, 0.19 at 1/4 inch, and vacuum-rated) or a 3V3 at Cv 0.62 for the highest flow in the range. Small duties can drop to 3V1 at 3.0 W DC. Remember the NC/NO state is permanent once purchased, and double-acting cylinders call for the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V2M Solenoid Valve 3V2MNCF-13F FAQ
Thirteen NC 3/2 stations, Cv 0.1 per station, 0-0.8 MPa operating pressure, -20 to 70 C temperature, 7.0 W per DC12V coil (91 W all on), IP65 protection, PT1/8 ports, spring return, direct-acting coaxial poppet construction, 40 um maximum air filtration.
This assembly vents all thirteen stations through one common base port, which keeps tubing short and silencing simple. Choose the D (independent exhaust) variant instead when a station must not see back-pressure from others, for example where exhaust speed affects cylinder return time.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V2M Solenoid Valve 3V2MNCF-13F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.