Airtac 3V2M Solenoid Valve 3V2MNOAI-11F
2、Coaxial shut-off design ensures excellent sealing performance and high flow capacity; Requires no oil lubrication;
3、Equipped with manual override for simplified installation and commissioning;
4、Modular design with base mount enables multi-valve integration for space-saving configurations;
5、Centralized air supply and integrated wiring streamline troubleshooting during fault diagnosis;
6、Flexible and scalable configuration supports arbitrary combinations or expansion of valve quantities/types;
7、Dedicated base gasket design – Flipping the gasket does not allow NC/NO conversion.
Category: Solenoid Valves , Brand: AirTAC , Series: 3V2M
AirTAC 3V2MNOAI-11F Solenoid Valve Technical Details
- Model: 3V2MNOAI-11F
- Type: 2-position 3-way normally closed (direct-acting)
- Port configuration: PT1/8 (ISO G1/8 optional)
- Operating pressure range: 0.15–0.8 MPa (21.7–116 PSI)
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Response time: ≤15ms (on/off cycle)
- Flow coefficient (Cv): 0.65
- Weight: 210g ±5g (without connector)
- Dimensions: 54mm(L) × 38mm(W) × 67mm(H)
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Ambient temperature: -20℃ to 80℃ (non-freezing)
- Power consumption: DC: 2.5W max / AC: 3.5VA max
- Protection class: IP67 (dustproof & temporary immersion)
- Port thread depth: 10mm (minimum engagement)
- Max cycling rate: 5Hz (300 cycles/minute)
High-speed direct-operated solenoid valve featuring brass body construction with anodized aluminum coil housing. Designed for precise air flow control in compact pneumatic systems. The "F" suffix indicates built-in manual override and LED status indicator. Requires 5μm filtered lubricated air (ISO 8573-1 class 4) with ≤5% relative humidity. Compatible with ISO VG32 hydraulic oil lubrication.
- Robotic end-effector tooling (grippers, vacuum cups)
- Pharmaceutical blister packaging machines
- Beverage canning line diverters
- Textile machinery tension control
- Semiconductor wafer handling systems
- Dental chair pneumatic adjustments
Installation protocol:
Mount vertically (±5° tolerance) using M4 mounting screws with vibration washers.
Maintain 12mm clearance below for electrical connector access. Perform 10-minute
dry cycling before load operation. Use P/N AS2201F filter regulator for optimal performance.
| Property | Property Value |
|---|---|
| sku | 3V2MNOAI-11F |
| Position | 3-Port 2-Position |
| Initial Position | Normally Open |
| Standard Voltage | AC220V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.