AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W)
The AirTAC AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Port size1/4 in
- Coil voltageDC24V
- Electrical entryDIN plug (DIN socket type)
- Series3V320
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W)
AirTAC's 3V32008B-W is a 3/2 solenoid valve with 1/4 inch PT threads. The three ports are supply, outlet and exhaust; the two positions swap the 1/4 inch outlet between those supply and exhaust connections. That feed-or-vent behaviour is what a 3/2 is for, and it is why these valves sit in front of spring-return cylinders and on/off air lines rather than on double-acting sets. The 1/4 inch port is a step up from the 1/8 inch bodies, and PT is the family's standard thread.
It is a genuine AirTAC part. The family behind it spans both NC and NO states, five coil voltages, DIN plug or flying lead, and manifold bases in the 3V-F line. Flow, pressure and coil power are not numbers we can print for this series - request them through the RFQ and we will confirm every figure from the datasheet.
AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W) Technical Specifications
| Model | AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W) |
|---|---|
| Series | 3V320 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W)
| 3V320 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W) Is Used
Press retract
Controlling the single-acting retract cylinder on a pneumatic assembly press.
Test-rig actuation
Switching a spring-return fixture cylinder that holds samples in a materials test rig.
Pneumatic signalling
Passing an on/off air signal between sections of a machine's logic circuit, where one vent point matters.
Is the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W) the Right Part?
Start from the actuator. A 1/4 inch port is the step up from 1/8 inch in this family, so it is the natural choice when a spring-return cylinder has outgrown what a small port feeds comfortably; we will still gladly check the match before you order, since we do not hold flow figures for these bodies. Then set the electrical side: this SKU is DC24V on a DIN plug, and the coil voltage must equal your supply exactly.
Manifold mounting is the other decision. One valve on its own suits a standalone station; a 3V-F base carries several valves on one shared feed and one wiring run, which tidies the panel and makes faults easier to isolate. If your schedule needs a 3-port valve with published figures today, the AirTAC 3V2 and 3V3 bodies document them. For double-acting work, move to the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W) FAQ
Not printed here - we deliberately keep this page free of numbers we cannot stand behind. Send the RFQ and we will confirm pressure, flow and coil power from the AirTAC datasheet. The AirTAC 3V2 and 3V3 3-port series are the documented alternative if you need figures published today.
The valve itself stays the same; a 3V-F manifold base simply lets you bank several of these valves on one shared air supply and one wiring run. Valves are ordered separately from the base. It is worth considering once a panel holds three or more 3/2 valves.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008B-W)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.