
The AirTAC AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008C) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
A 3/2 solenoid valve has three ports - supply, outlet and exhaust - and two states: it either feeds air to the outlet or vents it. The 3V32008C carries a 1/4in port and an AC110V coil, a pairing that suits a plant whose control cabinet runs a 110-volt circuit rather than a 24V DC rail. Because the coil voltage is fixed at manufacture, matching it to the panel supply is the first check before ordering.
This is a genuine AirTAC part from the 3V320 body. Across the family you can order normally closed or normally open behaviour, five coil voltages, DIN plug or flying-lead entry, and manifold bases for multi-valve installations. Pressure range, flow and coil power are not figures we publish here - attach the model to your enquiry and we will read the numbers out of the datasheet.
| Model | AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008C) |
|---|---|
| Series | 3V320 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
| 3V320 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
An on/off air jet that clears dust and loose trim from cartons ahead of the case sealer - the 3/2 function feeds the nozzle or vents it.
A spring-return clamp cylinder that grips a pallet during stretch wrapping; the valve feeds it for clamping and exhausts it for release.
Swapping a failed valve on a machine whose panel is wired for AC110V - the coil on this SKU matches that supply, with a DIN plug connection at the body.
The real choices on this family are configuration choices. Normally closed leaves the outlet vented until the coil is energised; normally open feeds it until power is removed - pick NC where losing power should stop the actuator, NO where it should keep it running. A 1/4in port steps up from 1/8in and suits a larger spring-return cylinder. If your machine needs a double-acting cylinder driven, a 3/2 valve cannot do the job - the AirTAC 4V series is the 5-port route. PT thread is the standard on this family; G and NPT are order options. Since we do not hold published flow figures for the 3V320, ask us to check sizing against your actuator - and if you want a 3-port valve with published flow and coil power today, the documented 3V2 (1/8in and 1/4in) and 3V3 (1/4in) bodies carry those figures.
Confirm before you order
Not on this page. Quote the model in an RFQ and we will confirm the operating pressure, flow and coil power from the AirTAC datasheet. If you need published figures in front of you before you enquire, the 3V2 and 3V3 bodies are the AirTAC 3-port valves with documented specifications.
Ask what should happen on power loss. A normally closed valve shuts the outlet and vents it when de-energised, so a spring-return cylinder retracts; a normally open valve keeps the outlet fed, so the actuator holds its stroke. Both behaviours exist across the 3V family.
Genuine AirTAC parts produced by the AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.