AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F)
The AirTAC AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F) is a genuine 3-port 2-position (3/2) solenoid valve with 1/4 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Port size1/4 in
- Coil voltageDC12V
- Electrical entryDIN plug (DIN socket type)
- Series3V320
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F)
Where the air control has to run from a battery or a low-voltage DC rail, the 3V32008F is the matching member of the AirTAC 3V320 body: a 3-port, 2-position solenoid valve with a 1/4in outlet port and a DC12V coil. In use it either feeds the outlet or vents it, which is exactly the behaviour a single-acting cylinder or an on/off blow line needs.
You are buying a genuine AirTAC part. The wider 3V family covers normally closed and normally open versions, five coil voltages from DC12V to AC220V, DIN plug or flying-lead entry, and manifold bases for grouping several valves on one supply. No flow or power figures appear on this page - quote the model in an RFQ and we will pull the datasheet values for you.
AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F) Technical Specifications
| Model | AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F) |
|---|---|
| Series | 3V320 |
| Valve type | 3/2-way (3-port, 2-position) |
| Port size | 1/4 in |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F)
| 3V320 | Body. |
|---|---|
| 1/4 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F) Is Used
Workshop press ram
A single-acting ram on a small pneumatic press that extends under air and returns on its spring when the valve exhausts.
Battery-fed test rig
A 12V DC control rail on a mobile test trolley switching a clamp or a purge line without needing mains on board.
Welding jig clamps
Pneumatic swing clamps around a weld fixture that grip the panels while the torch runs and release between cycles.
Is the AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F) the Right Part?
A DC12V coil makes sense on mobile plant, vehicle-mounted rigs and any panel fed from a battery charger - the coil is wound for that voltage and cannot be adapted, so confirm the supply first. The 1/4in port carries the tubing sizes used by medium single-acting actuators. PT thread is the standard on this family; G and NPT are catalogue alternatives. On sizing we are straight with you: published flow figures for the 3V320 are not available to us, so send the actuator details and we will check the match, or point you at the documented 3V2 and 3V3 bodies if you need published flow and coil power in hand today. For double-acting cylinders the answer is the 5-port AirTAC 4V series, not this valve.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F) FAQ
Operating pressure range, flow and coil power, taken from the AirTAC datasheet once you raise an RFQ against 3V32008F. Buyers who need those numbers published up front usually choose the 3V2 or 3V3 body, where the datasheet values sit in the catalogue.
Only through its power supply: the coil must see 12V DC, which suits battery-fed and vehicle systems. Mounting is flexible - individually plumbed, in a cabinet on its DIN plug, or banked on a 3V-F manifold base with other 3V valves.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V320-08 Solenoid Valve, 3V300 Series (3V32008F)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.