Airtac 4V100 Solenoid Valve 4V110M5B-AM
The AirTAC Airtac 4V100 Solenoid Valve 4V110M5B-AM is a genuine 5/2-way single solenoid (spring return) solenoid valve with AM ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
- Valve type5/2-way
- FunctionSingle solenoid (spring return)
- Port sizeAM
- Effective area10.2 mm²
- Flow (Cv)0.6
- Series4V100
About the Airtac 4V100 Solenoid Valve 4V110M5B-AM
The 4V110M5B-AM is the compact 4V100 body in its 5/2 single-solenoid form, built here with M5 inlet and outlet ports and a DC24V coil. It switches compressed air to double-acting cylinders and actuators: energise the solenoid to send pressure to port A, cut power and the internal spring snaps the spool back so the rod retracts. The extended position is therefore held only while the coil stays energised.
With an effective area of 10.2 mm2 (Cv 0.6) it is sized for double-acting cylinders of roughly O16-32 mm bore. Spool actuation takes 0.05 s or less, the DC24V coil draws just 2.8 W, and the whole valve weighs 120 g. The M5 threads screw straight into a tapped manifold block or machine wall with no adaptor fittings, which keeps the pneumatic footprint minimal.
Airtac 4V100 Solenoid Valve 4V110M5B-AM Technical Specifications
| Model | Airtac 4V100 Solenoid Valve 4V110M5B-AM |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | AM |
| Exhaust port | AM |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 120 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Flow & Coil Options
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
Model Code: Airtac 4V100 Solenoid Valve 4V110M5B-AM
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -AM | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
Where the Airtac 4V100 Solenoid Valve 4V110M5B-AM Is Used
PCB in-circuit test fixture clamps
Small double-acting clamp cylinders hold boards flat during ICT probing. Cv 0.6 covers O16-32 mm clamps, and the spring return lifts every clamp the moment coil power drops.
Direct-mount on aluminium manifold blocks
M5 threads engage the tapped ports of a distribution manifold with no adaptors, ideal for tight valve banks in compact machines where the 120 g body keeps inertia low.
Benchtop pick-and-place grippers
A mini robot arm cycling a parallel gripper benefits from the 0.05 s response; the spring return guarantees the gripper opens on power-off for safe part release.
Is the Airtac 4V100 Solenoid Valve 4V110M5B-AM the Right Valve?
Downward, you are already at the floor: M5 is the smallest port AirTAC offers on the 4V100, so there is no smaller step in this body. The nearest sideways move is the 4V110-06, which carries the identical 10.2 mm2 / Cv 0.6 orifice on a 1/8 in tapered port for standard push-in fittings. Upward, step to the 4V200 body (Cv 1.0) once bores exceed ~32 mm or cycle rates climb. A single 4V110 can also sit on a 4V100 base and later join an integrated manifold valve group as your circuit grows.
Replacing one? Match five points: body size 4V100, function 10 (single solenoid, spring return), port M5 (M5 SKUs carry no thread letter), voltage code B (DC24V), and electrical entry - blank here, meaning terminal box rather than grommet.
Quick checklist
- ✓ Required flow (Cv) for cylinder & speed
- ✓ Function: single / double / 5-3 center
- ✓ Coil voltage (DC24 / AC220 …)
- ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
- ✓ Single valve or manifold base?
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.8 MPa operating pressure.
- check Match coil voltage to your controller output.
- check Use the manual override to test before powering.
- check Fit silencers or fittings to the exhaust ports.
- check Wiring by qualified personnel per AirTAC docs.
Airtac 4V100 Solenoid Valve 4V110M5B-AM FAQ
It is a 5/2 single-solenoid valve for double-acting cylinders and actuators in the ~O16-32 mm bore class. Key figures in one place: effective area 10.2 mm2 (Cv 0.6), response time 0.05 s or less, up to 5 cycles per second, operating pressure 0.15-0.8 MPa with 1.2 MPa proof pressure, DC24V coil at 2.8 W, weight 120 g, air filtered by a 40 um element. The M5 inlet and outlet are its smallest-port configuration; lubrication is not required.
The valve extends the cylinder only while the DC24V coil is energised; de-energising it lets the spring push the spool to the retract position. That gives you a fail-safe retract when power is cut, but it also means the solenoid must be fed continuously to hold the workpiece out. If you need the cylinder to keep its last position without power, use the double-solenoid 4V120 (memory) instead - and for suspended loads add pilot-operated check valves or a mechanical brake, since no directional valve alone is a certified safety hold.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 4V Valves
Request a Quote for Airtac 4V100 Solenoid Valve 4V110M5B-AM
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.