
The AirTAC 4V100 Solenoid Valve 4V110M5F is a genuine 5/2-way single solenoid (spring return) solenoid valve with M5 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V110-M5F is a compact 5/2-way single-solenoid valve built on the 4V100 body, directing compressed air to double-acting actuators with M5 threaded ports. Its spool is shifted by energising the DC12V coil (2.5 W) and returned by a mechanical spring when the signal is removed, making it ideal for circuits where the valve must default to a known position on power loss.
With an effective area of 10.2 mm² (Cv 0.6, catalog figure for the 4V110-06) and a response time at or below 0.05 s, this valve suits ~O16-32 mm bore cylinders in pick-and-place or clamping stations. The aluminum-alloy body weighs just 120 g and carries an IP65 protection rating, so it fits tightly into benchtop automation manifolds.
| Model | Airtac 4V100 Solenoid Valve 4V110M5F |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | M5 |
| Exhaust port | M5 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 120 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -M5 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
Actuates a O20 mm double-acting clamp cylinder on a DC12V control circuit. The spring-return action ensures the clamp opens automatically when power is cut, a safe default for operator-load stations.
Directs a O16 mm syringe-style dispenser in a lab automation setup. The 2.5 W coil runs cool on a 12 V battery or DIN-rail supply, and the M5 ports connect directly to 4 mm push-in fittings.
Shifts a small diverter on a tabletop conveyor sorting caps or vials. The 0.05 s response keeps cycle times short, while the 120 g weight lets the valve mount directly on a moving carriage.
Choose the 4V110-M5F when your application needs a spring-return 5/2 function on a DC12V supply and the actuator ports are M5. The 4V100 body’s 10.2 mm² effective area (Cv 0.6, catalog figure for the 4V110-06) is well matched to cylinders in the O16-32 mm range; if you are driving a O40 mm or larger bore, or need a faster cycle rate, step up to a 4V200-series valve (Cv 1.0).
For replacement, match five points: body size (4V100), function (5/2 single solenoid), port size and thread (M5), coil voltage (DC12V), and electrical entry (terminal box). This model can be mounted individually or on a 4V100 manifold base, which simplifies piping when multiple valves serve a compact station.
Quick checklist
With a 10.2 mm² effective area (Cv 0.6, catalog figure for the 4V110-06) the 4V100 body comfortably handles double-acting cylinders in the ~O16-32 mm bore range at typical shop pressures. For a O40 mm or larger cylinder, or if you need a cycle rate above 5 per second, consider moving to the 4V200 series (Cv 1.0).
No — the 4V110 is a single-solenoid, spring-return valve. When the DC12V signal is removed, the internal spring pushes the spool back to its home position (port A exhausts, port B pressurises). If you need the valve to hold its last position without power, choose a double-solenoid 4V120 model instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.