
The AirTAC 4V100 Solenoid Valve 4V110M5FI is a genuine 5/2-way single solenoid (spring return) solenoid valve with M5 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V110-M5FI is a compact 5/2-way solenoid valve that directs compressed air to double-acting cylinders and actuators in space-constrained automation. Its single-solenoid, spring-return mechanism requires a constant DC12V signal to hold the shifted position; de-energising the coil immediately returns the spool via mechanical spring force, making it a predictable choice for simple extend-retract sequences.
Pre-wired with a 0.5 m flying lead through a grommet entry, this model simplifies electrical hookup on small assembly cells and end-of-arm tooling. The 4V100 body delivers an effective area of 10.2 mm² (Cv 0.6, catalog figure for the 4V110-06) and a response time of 0.05 s or less, suiting ~O16-32 mm bore cylinders. The DC12V coil draws just 2.5 W, keeping thermal load low inside compact enclosures.
| Model | Airtac 4V100 Solenoid Valve 4V110M5FI |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | M5 |
| Exhaust port | M5 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 120 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -M5 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
Pilot a small double-acting clamp cylinder on a benchtop fixture. The spring-return action releases the part automatically when the DC12V signal drops, preventing damage during an E-stop event.
Control a lightweight gripper on a Cartesian gantry. The grommet flying lead routes cleanly through cable carriers, and the 2.5 W coil avoids overheating inside the compact robot wrist housing.
Actuate a double-acting syringe pump or reagent valve in an automated assay instrument. The M5 port matches common lab tubing fittings, and the 0.05 s response enables precise volumetric dosing.
Choose the 4V110-M5FI when you need a single-solenoid 5/2 valve with an M5 threaded port and a low-power DC12V grommet connection. The spring-return design ensures the valve defaults to a known position if power is interrupted, which is essential for non-memory-dependent cycles. If your cylinder is larger than O32 mm or you need higher cycle rates, step up to the 4V200 series (Cv 1.0) for greater flow capacity.
For a direct replacement, match five points: 4V100 body size, 5/2 single-solenoid function (10), M5 port, DC12V coil voltage, and grommet electrical entry. The M5 port uses no thread-type suffix, so confirm your fittings are M5. If you need to bank multiple valves, this body mounts directly onto a 4V100 manifold base, reducing piping and assembly time.
Quick checklist
With a Cv of 0.6 and 10.2 mm² effective area, this 4V100-body valve suits double-acting cylinders approximately O16-32 mm. It can cycle a small bore cylinder at up to 5 cycles per second. For larger or faster applications, consider the 4V200 series.
Yes. The single-solenoid 4V110 requires a constant DC12V signal to hold the spool in the actuated position. When the signal is removed, the internal spring pushes the spool back to its rest state. If you need a valve that holds position without power, choose the double-solenoid 4V120 memory type.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.