
The AirTAC 4V100 Solenoid Valve 4V120M5C is a genuine 5/2-way double solenoid (memory) solenoid valve with M5 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V120-M5C is a 5/2-way double-solenoid pneumatic valve built on the compact 4V100 body, directing compressed air to double-acting cylinders and actuators. Its defining characteristic is a memory spool: a momentary pulse to either coil shifts the valve, and the spool then stays locked in that last-commanded position by land friction and balanced pressure—no holding current, no spring return. This makes it ideal for applications where the valve must retain its state even if the electrical signal is removed, without consuming continuous power.
With M5 threaded ports and an AC110V coil drawing 3.5 VA, this model suits miniature benchtop automation. The 4V120 delivers an effective area of 10.2 mm² (Cv 0.6, catalog figure for the 4V110-06) and a rapid response time of 0.05 s or less, comfortably cycling small-bore cylinders in the ~Ø16-32 mm range at up to 5 cycles per second. The aluminum-alloy body weighs 175 g and carries an IP65 protection rating, ensuring reliable service in dry, non-corrosive industrial environments.
| Model | Airtac 4V100 Solenoid Valve 4V120M5C |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | M5 |
| Exhaust port | M5 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 175 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -M5 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
Pulse the 4V120-M5C to clamp a delicate electronic component in a test fixture. The memory spool holds clamping force without coil heating, protecting the part during extended dwells.
In a lab automation setup, use this valve to divert a reagent stream. The double-solenoid memory ensures the flow path stays fixed after a brief trigger, ideal for sequential analysis routines.
Command a small parallel gripper on a Cartesian robot. The 4V120-M5C's M5 ports connect directly to the gripper, and the memory function keeps the part secure between moves without continuous power.
Choose the 4V120-M5C when your compact machine sequence requires a valve to hold its last position without a sustained electrical signal, such as a clamp that must stay closed during a power-saving mode. The M5 port interface is a direct fit for micro-cylinders and grippers. If your cylinder bore exceeds 32 mm or you need more flow for faster actuation, step up to the 4V200 series (Cv 1.0) with its larger 1/8" or 1/4" ports.
For replacement, match five points precisely: body size (4V100), function (double solenoid 5/2, code 20), port and thread (M5), coil voltage (AC110V), and electrical entry (terminal box). The 4V120 can be mounted individually or ganged on a manifold base, simplifying air supply and wiring for multi-station setups. Always confirm that the system's holding requirements are met by the valve's memory function alone, or add a pilot-operated check valve if absolute load security is required.
Quick checklist
With an effective area of 10.2 mm² (Cv 0.6, catalog figure for the 4V110-06), it is well-matched to double-acting cylinders in the ~Ø16-32 mm range for typical cycling. It can physically connect to larger cylinders via M5 fittings, but actuation speed will drop. For bores above 32 mm, consider the 4V200 series.
A momentary electrical pulse shifts the internal spool to one side, where it remains held by friction and balanced air pressure—no springs or magnets are involved. While this holds the valve position on power loss, it is not a safety-rated load brake. For suspended or critical vertical loads, you must add a mechanical brake or a pilot-operated check valve at the cylinder ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.