
The AirTAC 4V100 Solenoid Valve 4V120M5E is a genuine 5/2-way double solenoid (memory) solenoid valve with M5 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V120-M5E is a 5/2-way double-solenoid directional control valve built on the compact 4V100 body, directing compressed air to double-acting cylinders and actuators. Its memory function means the spool stays in its last pulsed position without holding current—a practical choice for small automation sequences where you want a state to persist even if the electrical signal is removed. This M5-threaded version weighs 175 g and delivers an effective area of 10.2 mm² (Cv 0.6, catalog figure for the 4V110-06), suiting ~Ø16-32 mm cylinders in benchtop and light-duty applications.
Equipped with an AC24V coil drawing 4.0 VA and a terminal-box electrical entry, the 4V120-M5E responds in 0.05 s or less and operates on filtered air at 0.15-0.8 MPa. The aluminum-alloy body, IP65 protection, and manual override make it a reliable, serviceable component for compact pneumatic systems where a dedicated position-hold without constant power is needed.
| Model | Airtac 4V100 Solenoid Valve 4V120M5E |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | M5 |
| Exhaust port | M5 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 175 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -M5 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The memory function holds a small gripper open or closed without continuous coil power, reducing heat buildup in dense benchtop pick-and-place cells.
Controls small double-acting cylinders on fluid-handling or sample-prep modules where the M5 porting and AC24V supply align with existing lab infrastructure.
Pulse the valve to clamp a part, then remove the signal—the spool stays put, keeping the fixture closed during a machining or bonding cycle on a small rotary table.
Choose the 4V120-M5E when your application needs a compact 5/2 valve that holds its last shifted position after the signal is removed—ideal for small double-acting cylinders where a spring-return (single-solenoid) would drop the load on power loss. The M5 threaded ports keep the footprint minimal for tight manifold or sub-base layouts.
If your cylinder is larger than Ø32 mm or you need faster cycling, step up to the 4V200 series (Cv 1.0). For a 5-point replacement match, verify: body size (4V100), function (20 = double solenoid memory), port (M5), coil voltage (AC24V), and electrical entry (terminal box). The 4V120-M5E can be mounted on an integrated manifold base for multi-valve assemblies.
Quick checklist
With an effective area of 10.2 mm² (Cv 0.6, catalog figure for the 4V110-06), it suits double-acting cylinders roughly in the Ø16-32 mm range for typical cycling. Larger bores will move slower; for Ø40 mm and above, consider the 4V200 series (Cv 1.0) for snappier response.
Yes. The 4V120-M5E is a memory-type valve—the spool remains in the position it was last pulsed to, held by land friction and balanced pressure. It does not use magnetic latching or holding current. For safety-critical suspended loads, always add a piloted check valve or mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.