AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E)
The AirTAC AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with 130C06E ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
- Valve type5/3-way
- Function5/3 double solenoid — Closed center
- Port size130C06E
- Effective area8.6 mm²
- Flow (Cv)0.51
- Series4V100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E)
The 4V130C-06E directs compressed air to double-acting cylinders and actuators in a 5/3 closed-center configuration. When both solenoids are de-energized, all ports are blocked, locking the cylinder in place to hold a mid-stroke position—ideal for applications requiring a pause without drift.
This model operates on an AC24V coil drawing 4.0 VA and uses a 1/8 PT terminal-box connection. With an effective area of 8.6 mm² (Cv 0.51) and a response time of 0.05 s or less, it suits small-bore cylinders in the ~Ø16-32 mm range. The IP65-rated aluminum body weighs 200 g and can be mounted on an integrated manifold.
AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E) Technical Specifications
| Model | AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E) |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | 130C06E |
| Exhaust port | 130C06E |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 200 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Flow & Coil Options
| Effective area | 8.6 mm² |
|---|---|
| Flow coefficient | Cv 0.51 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
Model Code: AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E)
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -130C06E | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
Where the AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E) Is Used
Mid-Stroke Part Clamping
A small fixture stops a cylinder at center to clamp a delicate component for inspection, then advances after the check is complete.
Benchtop Liquid Dispensing
Pauses a dispensing head at a safe center height between dispense cycles, preventing drips on the workpiece during indexing.
Pick-and-Place Z-Axis Hold
Holds a vacuum gripper at a mid-height standby position, reducing cycle time by eliminating a full retract between picks.
Is the AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E) the Right Valve?
Choose the 4V130C-06E when your automation sequence needs a defined stop-and-hold at center, such as a clamping station that pauses before advancing. If your cylinder is larger than Ø32 mm or you need a faster cycle rate, step up to the 4V200 series for its higher Cv of 1.0.
For a drop-in replacement, match five points: the 4V100 body size, the 5/3 closed-center function, the 1/8 port with PT thread, an AC24V coil, and the standard terminal-box entry. If you are building a multi-valve station, this body mounts directly onto a 4V100 manifold base to simplify plumbing.
Quick checklist
- ✓ Required flow (Cv) for cylinder & speed
- ✓ Function: single / double / 5-3 center
- ✓ Coil voltage (DC24 / AC220 …)
- ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
- ✓ Single valve or manifold base?
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.8 MPa operating pressure.
- check Match coil voltage to your controller output.
- check Use the manual override to test before powering.
- check Fit silencers or fittings to the exhaust ports.
- check Wiring by qualified personnel per AirTAC docs.
AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E) FAQ
With an effective area of 8.6 mm² (Cv 0.51) and a max frequency of 3 cycles per second, it pairs well with double-acting cylinders in the ~Ø16-32 mm range for moderate-speed applications.
As a 5/3 closed-center valve, when both solenoids are off, all ports are blocked. The cylinder is held in its last position, but for critical suspended loads you must add a pilot-operated check valve or mechanical brake—the valve alone is not a safety holding device.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 4V Valves
Request a Quote for AirTAC 4V130C-06E Solenoid Valve, 5/3-way, closed center, PT1/8, AC24V, terminal entry (4V130C06E)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.