
The AirTAC 4V100 Solenoid Valve 4V130CM5E is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with M5 ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V130C-M5E is a 5/3-way double-solenoid valve with a closed center position, built on the compact 4V100 body with M5 threaded ports. When both solenoids are de-energized, all ports are blocked, holding a double-acting cylinder in place. This model is configured with an AC24V coil drawing 4.0 VA, making it suitable for control panels with 24 VAC power available.
Designed for the smallest pneumatic circuits, the 4V100 series delivers an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06) and a maximum cycling rate of 3 cycles per second for 5/3 functions. The spool responds in 0.05 seconds or less, and the IP65-rated aluminum body weighs just 200 g. It pairs well with double-acting cylinders in the ~Ø16-32 mm range for precise, mid-stroke holding.
Closed-center stopping is not a load-holding or safety function: air leakage can let the cylinder creep, so add a pilot check valve or a mechanical brake where a load must be held.
| Model | Airtac 4V100 Solenoid Valve 4V130CM5E |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | M5 |
| Exhaust port | M5 |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 200 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 8.6 mm² |
|---|---|
| Flow coefficient | Cv 0.51 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -M5 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
A 5/3 closed-center valve stops a Ø20 mm clamp cylinder mid-extension and holds it, preventing workpiece shift during delicate assembly operations on a benchtop fixture.
In a compact liquid handler, the 4V130C-M5E centers to lock a double-acting gripper in place over a vial rack, ensuring accurate pick-and-place without air consumption in the hold state.
Controls a small gate on a parts feeder track. The closed center halts the gate at any point in its stroke, allowing precise metering of tiny components into an inspection station.
Choose the 4V130C-M5E when you need a small, direct-mounted valve to stop a cylinder mid-stroke and hold position. The closed center blocks all air at the ports, so a lightly loaded cylinder resists movement when the valve is centered. If your cylinder is larger than Ø32 mm or needs faster fill rates, step up to the 4V200 body (Cv 1.0) for higher flow.
For replacement, match all five points: body size (4V100), function (130C, 5/3 closed center), port size and thread (M5), coil voltage (AC24V), and electrical entry (terminal box). If you need a pre-wired lead-out instead of a terminal box, look for the 'I' suffix (grommet) variant. For a manifold setup, the M5 base option allows multiple valves to share a common supply and exhaust.
Quick checklist
With an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06), this 4V100 valve suits double-acting cylinders approximately Ø16-32 mm. It provides moderate speed for small actuators. For larger bores or faster cycling, consider moving up to the 4V200 series (Cv 1.0).
When both solenoids are off, the spool springs to the center position and blocks pressure, exhaust, and both cylinder ports. This traps air in the cylinder, holding the piston in place. The AC24V coil consumes 4.0 VA when energized. For safety-critical holding, add a pilot-operated check valve at the cylinder ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.