
The AirTAC 4V100 Solenoid Valve 4V130CM5F is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with M5 ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V130C-M5F is a 5/3-way double-solenoid valve built on the compact 4V100 body, designed to precisely direct compressed air to double-acting cylinders and actuators. In its closed-center configuration, both cylinder ports are blocked when the valve is at rest, holding the actuator in position. This model operates on a DC12V coil (2.5 W) and features an M5 threaded port interface for direct integration into miniature pneumatic circuits.
With an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06) and a response time of 0.05 s or less, this valve suits small-bore cylinders in the ~Ø16-32 mm range. The aluminum-alloy body weighs 200 g, and the spool design requires no lubrication, supporting filtered air at 0.15-0.8 MPa with IP65 protection. It is a genuine AirTAC component, factory-tested for reliable sequencing in tight benchtop automation spaces.
Closed-center stopping is not a load-holding or safety function: air leakage can let the cylinder creep, so add a pilot check valve or a mechanical brake where a load must be held.
| Model | Airtac 4V100 Solenoid Valve 4V130CM5F |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | M5 |
| Exhaust port | M5 |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 200 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 8.6 mm² |
|---|---|
| Flow coefficient | Cv 0.51 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -M5 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The closed-center function holds small double-acting clamps securely at mid-position, preventing workpiece shift during delicate assembly or laser marking operations.
Controls syringe-style actuators in lab automation, where the DC12V coil and M5 ports fit compact dispensing robots and microfluidic test stands.
Drives Ø16-25 mm cylinders on rotary index tables, stopping the actuator precisely at each station without air consumption in the holding phase.
Choose the 4V130C-M5F when your application demands a small, DC12V-powered valve that can stop and hold a double-acting cylinder mid-stroke. The closed-center spool blocks all ports at rest, making it ideal for short-dwell holding on miniature clamps or pick-and-place arms. If your cylinder is larger than Ø32 mm or requires faster cycling, consider stepping up to the 4V200 series for its higher Cv of 1.0.
For replacement, match these five points exactly: 4V100 body size, 5/3 closed-center function (30C), M5 port thread, DC12V coil voltage, and terminal box electrical entry. This valve can be mounted on a manifold base for grouped control, simplifying tubing and wiring in multi-station setups.
Quick checklist
With an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06), this valve is well-matched to double-acting cylinders in the ~Ø16-32 mm range. It provides adequate flow for small clamping, gripping, and indexing tasks without oversizing the valve.
When both solenoids are de-energized, the spool moves to its center position and blocks all ports (P, A, B, EA, EB). This traps air on both sides of a double-acting cylinder, holding the piston in place. The DC12V coil consumes 2.5 W, and the valve weighs 200 g.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.