AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C)
The AirTAC AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with 130E06C ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
- Valve type5/3-way
- Function5/3 double solenoid — Closed center
- Port size130E06C
- Effective area8.6 mm²
- Flow (Cv)0.51
- Series4V100
About the AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C)
The AirTAC 4V130E-06C is a 5/3-way double-solenoid directional valve built on the compact 4V100 body, directing compressed air to double-acting cylinders and rotary actuators with 1/8 inch PT ports. Its exhaust center function means that when both solenoids are de-energized, the valve spool moves to the middle position where both cylinder ports A and B are connected to exhaust, allowing the attached cylinder to float freely—ideal for applications where the load must be manually repositioned or where no holding force is required at rest.
This AC110V-powered model consumes 3.5 VA and features a terminal box electrical entry. With an effective area of 8.6 mm2 (Cv 0.51) and a maximum cycling frequency of 3 cycles per second, it suits small-bore double-acting cylinders roughly in the Ø16-32 mm range. The aluminum-alloy body weighs 200 g, responds in 0.05 seconds or less, and carries an IP65 protection rating, making it a reliable choice for benchtop automation and light handling tasks.
AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C) Technical Specifications
| Model | AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C) |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | 130E06C |
| Exhaust port | 130E06C |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 200 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Flow & Coil Options
| Effective area | 8.6 mm² |
|---|---|
| Flow coefficient | Cv 0.51 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
Model Code: AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C)
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -130E06C | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
Where the AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C) Is Used
Manual Load-Assist Fixtures
Powers small clamping or lifting fixtures where the operator needs to slide the tool clear by hand after a cycle. The exhaust center depressurizes both cylinder sides, allowing free movement without fighting trapped air.
Benchtop Sorting Gates
Directs a double-acting gate cylinder on a small parts sorter. When the valve centers, the gate floats, preventing a jam if a part is caught and allowing the mechanism to be cleared easily.
Laboratory Sampler Actuation
Controls a pneumatic slide on a test-bench sampler. The exhaust center ensures the probe can be manually retracted for cleaning between batches without energizing the valve.
Is the AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C) the Right Valve?
Choose the 4V130E-06C when your circuit needs a 5/3 exhaust-center valve on the 4V100 platform with an AC110V supply. The exhaust center is specifically for setups where the cylinder must be free of residual pressure at idle—common in manual load-assist stations or clamping sequences where the tool needs to be pushed clear by hand. If you need the cylinder to hold position at center instead, select the closed-center 4V130C variant.
When sizing, note that this 5/3 valve has a smaller effective area (8.6 mm2) than the 5/2 4V110/120 models. If your Ø32 mm cylinder requires faster fill times or you are approaching the flow limit, consider stepping up to the 4V200 series (Cv 1.0). For replacement, match all five points: 4V100 body, 5/3 exhaust-center function, 1/8 inch PT ports, AC110V coil voltage, and terminal box entry.
Quick checklist
- ✓ Required flow (Cv) for cylinder & speed
- ✓ Function: single / double / 5-3 center
- ✓ Coil voltage (DC24 / AC220 …)
- ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
- ✓ Single valve or manifold base?
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.8 MPa operating pressure.
- check Match coil voltage to your controller output.
- check Use the manual override to test before powering.
- check Fit silencers or fittings to the exhaust ports.
- check Wiring by qualified personnel per AirTAC docs.
AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C) FAQ
In the center (neutral) position, both cylinder ports A and B are connected to the exhaust port, while the pressure port is blocked. This means the double-acting cylinder attached to the valve has no trapped pressure and can be moved freely by hand or external forces—useful for manual setup or fail-safe float conditions.
With an effective area of 8.6 mm2 (Cv 0.51), the 4V130E-06C is well-matched to double-acting cylinders approximately Ø16 to Ø32 mm in typical cycling applications. For larger cylinders or faster cycle rates, a 4V200 series valve with a higher Cv of 1.0 would be a more suitable choice.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 4V Valves
Request a Quote for AirTAC 4V130E-06C Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, terminal entry (4V130E06C)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.