verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 4V Series · 5/3-way Solenoid Valve

Airtac 4V100 Solenoid Valve 4V130EM5BI

The AirTAC 4V100 Solenoid Valve 4V130EM5BI is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with M5 ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.

  • Valve type5/3-way
  • Function5/3 double solenoid — Exhaust center
  • Port sizeM5
  • Effective area8.6 mm²
  • Flow (Cv)0.51
  • Series4V100
$51.14 $58.64Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 4V130E-M5 stroke, mounting and version on one page All 4V130E-M5 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac 4V100 Solenoid Valve 4V130EM5BI

The 4V130E-M5BI is an AirTAC 4V100-series 5/3-way pneumatic solenoid valve configured with a double solenoid and an exhaust center position. When neither coil is energized, both cylinder ports are connected to exhaust, allowing a double-acting actuator to move freely—ideal for applications where the load must be manually positioned or the cylinder needs to 'float' without residual pressure. This specific model features an M5 threaded port, a DC24V coil drawing just 2.8 W, and a grommet-style electrical entry with a pre-wired 0.5 m flying lead for fast DIN-rail wiring.

With an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06) and a maximum cycling rate of 3 cycles per second, this valve is sized for compact double-acting cylinders roughly in the Ø16–32 mm range. The spool shifts in 0.05 seconds or less, and the IP65-rated enclosure ensures reliable operation in dusty or lightly washed-down environments. The aluminum-alloy body weighs 200 g and can be mounted individually or ganged on a manifold base for multi-station control.

Airtac 4V100 Solenoid Valve 4V130EM5BI Technical Specifications

ModelAirtac 4V100 Solenoid Valve 4V130EM5BI
Series4V100 solenoid valve (spool type)
Valve type5/3-way
Function5/3 double solenoid — Exhaust center
Port sizeM5
Exhaust portM5
Effective area (Cv)8.6 mm² (Cv 0.51)
FluidAir (filtered by 40µm element)
Pilot typeInternal / external pilot
Operating pressure0.15 – 0.8 MPa
Proof pressure1.2 MPa
Max frequency3 cycle/sec
Response time≤ 0.05 s (activating)
Temperature-20 to +70 °C
Body materialAluminum alloy
Weight200 g

Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Flow & Coil Options

Effective area8.6 mm²
Flow coefficientCv 0.51
Response time≤ 0.05 s
Coil powerAC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W
Protection / insulationIP65 (DIN40050), B-class
Voltage optionsDC24V, DC12V, AC110V, AC220V
Manual overrideYes (locking / non-locking)

Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.

Model Code: Airtac 4V100 Solenoid Valve 4V130EM5BI

4VSolenoid valve, spool type, 4-series.
1Body size (4V100) — sets port & flow.
3Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3.
-M5Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2".

Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.

Where the Airtac 4V100 Solenoid Valve 4V130EM5BI Is Used

precision_manufacturing

Benchtop Pick-and-Place

The exhaust center lets the Z-axis float during manual teach-mode adjustments on small benchtop Cartesian robots, preventing trapped air pressure and making manual positioning effortless.

handyman

Small Clamping Fixtures

In a compact fixture using an M5-ported cylinder, de-energizing the valve exhausts both sides of the piston. The clamp opens freely without a spring, simplifying part changeover in electronics assembly.

science

Laboratory Sampler Actuation

The 0.5 m grommet lead and 2.8 W DC coil integrate cleanly into a lab instrument's 24 V control system. The exhaust center ensures a syringe pump's piston can be manually retracted during protocol setup.

Is the Airtac 4V100 Solenoid Valve 4V130EM5BI the Right Valve?

Choose the 4V130E-M5BI when your small automation cell needs a 5/3 exhaust-center function on an M5 manifold or direct-mount base. The exhaust center is the right call when the cylinder rod must be free of air pressure at idle—common in manual load/unload stations or clamping setups where the tool retracts by gravity. If you need the cylinder to hold position at center instead, switch to the closed-center 4V130C variant.

For a direct replacement, match five points: stick with the 4V100 body size, confirm the 5/3 exhaust-center spool, verify M5 port threads, select DC24V coil voltage, and ensure the grommet (I) entry with flying lead matches your existing wiring harness. If your cylinder is larger than Ø32 mm or you need faster cycle rates, step up to the 4V200 series, which offers a larger Cv of 1.0.

AirtacDistr lists every 4V130E-M5 order code with its price on one page at https://airtacdistr.com/products/airtac-4v130e-m5-solenoid-valve

Quick checklist

  • ✓ Required flow (Cv) for cylinder & speed
  • ✓ Function: single / double / 5-3 center
  • ✓ Coil voltage (DC24 / AC220 …)
  • ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
  • ✓ Single valve or manifold base?
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 0.8 MPa operating pressure.
  • check Match coil voltage to your controller output.
  • check Use the manual override to test before powering.
  • check Fit silencers or fittings to the exhaust ports.
  • check Wiring by qualified personnel per AirTAC docs.

Airtac 4V100 Solenoid Valve 4V130EM5BI FAQ

When both solenoids are off, the spool sits in the middle and connects both cylinder ports (A and B) to the exhaust port. This means no compressed air is trapped in the cylinder, so the piston rod can be moved freely by hand or by an external force—a state often called 'float'. It is not a holding position.

Yes. The DC24V coil on the 4V100 body draws only 2.8 W and is rated for continuous duty. The grommet entry (I) provides a sealed 0.5 m flying-lead connection, which is convenient for direct wiring into a terminal strip inside a control cabinet.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac 4V100 Solenoid Valve 4V130EM5BI

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 4V130EM5BI and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.