
The AirTAC 4V130P-06C Solenoid Valve, 5/3-way, pressure center, PT1/8, AC110V, terminal entry (4V130P06C) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V130P-06C is a 5/3-way double-solenoid valve built on the compact 4V100 body, directing compressed air to double-acting cylinders and actuators. Its pressure-center spool design pressurises both cylinder ports when the valve is in the neutral position, which can be used to create a balanced force or to pressurise a closed system for specific holding or testing sequences.
This 1/8" PT-ported model is fitted with an AC110V coil drawing 3.5 VA, making it compatible with common mains control panels. With an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06) and a response time of 0.05 s or less, it is a precise pilot for small-bore cylinders approximately Ø16-32 mm in light automation tasks.
| Model | AirTAC 4V130P-06C Solenoid Valve, 5/3-way, pressure center, PT1/8, AC110V, terminal entry (4V130P06C) |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 200 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 8.6 mm² |
|---|---|
| Flow coefficient | Cv 0.51 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
Used in pneumatic systems where both sides of a double-acting cylinder must be brought to line pressure simultaneously at the neutral position, such as in certain press or test rig setups.
Suits light-duty clamping fixtures on benchtop jigs where a balanced pressure center prevents drift in a specific way, controlling a small double-acting clamp cylinder.
Directs air in compact lab automation devices, where the 4V100's 8.6 mm² effective area provides adequate flow for small actuators and the pressure center is needed for a specific test sequence.
Choose the 4V130P-06C when your application requires a 5/3 center condition that applies pressure to both cylinder ports at rest, rather than blocking or exhausting them. This is a niche function used in specific clamping or equalisation circuits, so verify that pressure-center logic matches your pneumatic sequence before ordering.
If your cylinder is larger than Ø32 mm or needs a faster fill, consider stepping up to the 4V200 series for its higher Cv of 1.0. For a direct replacement, match all five points: the 4V100 body size, the 5/3 pressure-center function, the 1/8" port with PT thread, the AC110V coil voltage, and the standard terminal box electrical entry.
Quick checklist
In the center (neutral) position, with neither solenoid energised, the valve spool connects the supply port to both cylinder ports (A and B), while the exhaust ports are blocked. This applies equal pressure to both sides of a double-acting cylinder.
The 4V130P-06C has an effective area of 8.6 mm² and a Cv of approximately 0.51. This flow rate is optimised for small-bore double-acting cylinders, typically in the Ø16-32 mm range, and the valve can cycle at up to 3 times per second.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.