
The AirTAC 4V130P-06E Solenoid Valve, 5/3-way, pressure center, PT1/8, AC24V, terminal entry (4V130P06E) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/8 ports and an effective area of 8.6 mm² (Cv 0.51). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V130P-06E is a 5/3-way double-solenoid valve that introduces a pressure-center condition, supplying air to both cylinder ports simultaneously when the valve is at mid-stroke. This 4V100-series body directs compressed air to double-acting actuators, and the pressure-center function is often used to create a balanced force that resists external movement without fully locking the load.
With an effective area of 8.6 mm² (Cv 0.51, catalog figure for the 4V130C-06) and a 3 cycles/sec max frequency, this model suits ~Ø16-32 mm cylinders in compact automation. The AC24V coil draws 4.0 VA, and the spool shifts in ≤0.05 s. The aluminum-alloy body weighs 200 g and carries an IP65 protection rating, making it a durable choice for benchtop pneumatic systems.
| Model | AirTAC 4V130P-06E Solenoid Valve, 5/3-way, pressure center, PT1/8, AC24V, terminal entry (4V130P06E) |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 200 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 8.6 mm² |
|---|---|
| Flow coefficient | Cv 0.51 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure-center spool applies equal pressure to both sides of a double-acting cylinder, helping a small Z-axis resist sag or drift during a paused state in pick-and-place modules.
In benchtop analyzers, this valve holds a gripper or probe in a neutral force balance, preventing delicate samples from being crushed while the system waits for the next command.
Use the 4V130P-06E to maintain a light, consistent clamping pressure on a workpiece during an assembly step, where a full lock is unnecessary but a spring-return would relax the grip.
Choose the 4V130P-06E when your circuit needs both cylinder ports pressurized at center to balance a vertical or lightly loaded axis without drifting. If your cylinder is larger than Ø32 mm or you need a higher flow rate, step up to the 4V200 body (Cv 1.0) for faster actuation. For a complete manifold solution, this valve mounts directly onto a 4V100-series base.
When replacing an existing valve, match five points precisely: the 4V100 body size, the 5/3 pressure-center function (30P), the 1/8-inch PT-threaded ports, the AC24V coil voltage, and the standard terminal-box electrical entry. This ensures direct compatibility and preserves the original pneumatic timing.
Quick checklist
In the center position, both cylinder ports (A and B) receive supply pressure simultaneously. This creates a balanced force that can hold a cylinder against light external loads or prevent it from free-floating, unlike an exhaust-center valve which vents both ports to atmosphere.
No. The pressure-center function provides a balancing force, not a mechanical lock. For any suspended or vertical load where dropping would pose a safety risk, you must add a pilot-operated check valve at the cylinder ports or a dedicated mechanical brake. The valve alone does not guarantee load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.