
The AirTAC 4V220-06EI Solenoid Valve, 5/2-way, PT1/8, AC24V, grommet entry (4V22006EI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/8 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V220-06EI is a 5/2-way double-solenoid pneumatic directional valve that directs compressed air to double-acting cylinders and actuators. Because it uses two solenoids with a memory spool, a momentary pulse to one side shifts the spool and it stays in that position even after power is removed—there is no spring to return it. This makes it ideal for applications where the valve must hold its last commanded state through an E-stop or power cycle without needing a constant electrical signal.
Supplied with an AC24V coil (5.0 VA inrush) and a pre-wired grommet entry with a 0.5 m flying lead, this model simplifies electrical hookup on machines where a terminal box is inconvenient. The 4V200 body provides an effective area of 17.0 mm² (Cv 1.0, catalog figure for the 4V210-08) and a response time of 0.05 s or less, suiting it to double-acting cylinders roughly Ø32–50 mm. The all-aluminum body carries an IP65 rating and includes a manual override for setup and troubleshooting.
| Model | AirTAC 4V220-06EI Solenoid Valve, 5/2-way, PT1/8, AC24V, grommet entry (4V22006EI) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 320 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The memory spool holds the gate position through power interruptions, so a brief pulse from the PLC sets the divert direction and the valve stays put without continuous coil power—reducing heat buildup in high-cycle packaging machinery.
In automated assembly cells, the 4V220-06EI shifts a double-acting clamp cylinder closed with one pulse and holds clamping force even if the control panel is powered down, preventing part movement during tool changes.
Two solenoids give independent electrical control of extend and retract on a double-acting cylinder. The AC24V grommet lead simplifies wiring into machines that already distribute 24 V AC for sensors and pilot lights.
Choose the 4V220-06EI when you need a 1/8″ PT-ported 5/2 valve that retains its spool position without holding current—the memory function eliminates coil heating and keeps the actuator in place if control power drops. If your cylinder is smaller than Ø32 mm, consider stepping down to a 4V100-series valve (Cv 0.6) for finer flow control; for bores above Ø50 mm or faster cycle times, the 4V300 body (Cv 1.65) is a better match.
When replacing an existing valve, match five points: body size (4V200), function (double solenoid 5/2), port and thread (1/8″ PT), coil voltage (AC24V), and electrical entry (grommet with flying lead). The 4V220 can be used as a single valve on a sub-base or ganged into a manifold assembly—the manifold option simplifies piping when multiple valves control adjacent actuators. Note that the memory spool is not a safety-rated hold; if the application involves a suspended load, add a pilot-operated check valve or mechanical brake at the cylinder ports.
Quick checklist
With an effective area of 17.0 mm² (Cv 1.0, catalog figure for the 4V210-08), it suits double-acting cylinders roughly Ø32–50 mm. Smaller bores will cycle very fast; larger bores may run slower than desired. For bores above 50 mm, stepping up to a 4V300-series valve (Cv 1.65) gives better speed.
No. The 4V220 is a double-solenoid memory valve. A short pulse to coil 14 shifts the spool one way; a pulse to coil 12 shifts it back. The spool stays in the last-pulsed position by land friction and balanced pressure, with zero holding current. It is not magnetically latched.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.