AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F)
The AirTAC AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F) is a genuine 5/2-way double solenoid (memory) solenoid valve with 22006F ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
- Valve type5/2-way
- FunctionDouble solenoid (memory)
- Port size22006F
- Effective area17.0 mm²
- Flow (Cv)1.0
- Series4V200
About the AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F)
The 4V220-06F directs compressed air to double-acting cylinders and actuators, operating as a 5/2-way double-solenoid valve with a memory-hold function. When a 12 V DC pulse is sent to one of its coils, the spool shifts and stays locked in that last-commanded position by land friction and balanced pressure—no holding current, spring, or magnetic latch is needed. This makes it ideal for sequences where the valve must retain its state through a power cycle or E-stop without re-homing.
Built on the mid-flow 4V200 aluminum body, this model provides an effective area of 17.0 mm² (Cv 1.0) and can cycle up to 5 times per second. The 1/8-inch PT-ported valve weighs 320 g, and its DC12V coil draws just 2.5 W of power. With a response time of 0.05 seconds or less and IP65-rated protection, it delivers fast, reliable control for general industrial pneumatic tasks.
AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F) Technical Specifications
| Model | AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | 22006F |
| Exhaust port | 22006F |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 320 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Flow & Coil Options
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
Model Code: AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F)
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -22006F | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Where the AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F) Is Used
Packaging & Palletizing
The memory-hold spool keeps a clamp or pusher in its last position during a conveyor stop or power dip, preventing product shift without needing a constant signal.
Assembly Station Fixtures
Controls a double-acting clamp that must stay locked after a 12 V DC pulse, allowing the PLC to move on to the next step while the part remains securely fixtured.
Mobile & Battery-Powered Equipment
The low 2.5 W DC12V coil and memory function are ideal for battery-operated carts or mobile manipulators, where saving every watt-hour extends run time.
Is the AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F) the Right Valve?
Choose the 4V220-06F when your application needs a 5/2 valve that remembers its position without continuous power, and you are running a 12 V DC control system. Its 1/8-inch ports and Cv of 1.0 make it a strong fit for driving double-acting cylinders in the O32 to O50 mm bore range at moderate speed. If your cylinder is smaller (below O32), stepping down to a 4V100-series valve with a Cv of 0.6 can improve precision and reduce air consumption.
For a direct replacement, match all five points: the 4V200 body size, the 5/2 double-solenoid function (20), the 1/8-inch PT port, the DC12V coil voltage, and the standard terminal-box electrical entry. If you need a faster cycle rate for a larger bore, consider moving up to the 4V300 series (Cv 1.65). This valve can also be mounted on a manifold base to build a compact, centralized valve group.
Quick checklist
- ✓ Required flow (Cv) for cylinder & speed
- ✓ Function: single / double / 5-3 center
- ✓ Coil voltage (DC24 / AC220 …)
- ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
- ✓ Single valve or manifold base?
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.8 MPa operating pressure.
- check Match coil voltage to your controller output.
- check Use the manual override to test before powering.
- check Fit silencers or fittings to the exhaust ports.
- check Wiring by qualified personnel per AirTAC docs.
AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F) FAQ
With an effective area of 17.0 mm² (Cv 1.0), it suits double-acting cylinders roughly in the O32 to O50 mm bore range. It provides a good balance of flow and response for general automation tasks. For very small cylinders (O20 or less), a 4V100-series valve (Cv 0.6) offers finer control.
The spool is shifted by a momentary 12 V DC pulse to either coil. Once shifted, it stays in that position purely through land friction and balanced air pressure—no springs, holding current, or magnetic latching are involved. This means the valve holds its last state even if the machine is powered down, but it should not be used as a stand-alone safety device for holding suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 4V Valves
Request a Quote for AirTAC 4V220-06F Solenoid Valve, 5/2-way, PT1/8, DC12V, terminal entry (4V22006F)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.