verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 4V Series · 5/3-way Solenoid Valve

AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI)

The AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.

  • Valve type5/3-way
  • Function5/3 double solenoid — Closed center
  • Port sizePT1/8
  • Effective area13.6 mm²
  • Flow (Cv)0.8
  • Series4V200
$51.14 $58.64Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every 4V230E-06 stroke, mounting and version on one page All 4V230E-06 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI)

This 4V230E-06CI directs compressed air to double-acting cylinders with a 5/3-way exhaust-center spool, so when both solenoids are idle the cylinder ports A and B are vented to atmosphere—the actuator floats freely for manual positioning or safety relief. It is a mid-body 4V200-series valve with an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08) that suits ~Ø32–50 mm cylinders in moderate-speed applications.

The SKU is factory-configured with an AC110V coil drawing 4.5 VA, a pre-wired 0.5 m flying lead via a grommet entry, and 1/8-inch PT tapered ports. Response time is 0.05 s or below, the aluminum-alloy body carries an IP65 protection rating, and the dual-solenoid design holds the spool in its last commanded position without holding current.

AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI) Technical Specifications

ModelAirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI)
Series4V200 solenoid valve (spool type)
Valve type5/3-way
Function5/3 double solenoid — Closed center
Port sizePT1/8
Exhaust portPT1/8
Effective area (Cv)13.6 mm² (Cv 0.8)
FluidAir (filtered by 40µm element)
Pilot typeInternal / external pilot
Operating pressure0.15 – 0.8 MPa
Proof pressure1.2 MPa
Max frequency3 cycle/sec
Response time≤ 0.05 s (activating)
Temperature-20 to +70 °C
Body materialAluminum alloy
Weight360 g

Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Flow & Coil Options

Effective area13.6 mm²
Flow coefficientCv 0.8
Response time≤ 0.05 s
Coil powerAC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W
Protection / insulationIP65 (DIN40050), B-class
Voltage optionsDC24V, DC12V, AC110V, AC220V
Manual overrideYes (locking / non-locking)

Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.

Model Code: AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI)

4VSolenoid valve, spool type, 4-series.
2Body size (4V200) — sets port & flow.
3Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3.
-06Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2".

Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.

Where the AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI) Is Used

precision_manufacturing

Manual-Load Assembly Stations

Operators manually slide a fixture into position; the exhaust center lets the cylinder float so the tooling can be pushed back without fighting trapped air, improving ergonomics and speed.

conveyor_belt

Divert Gates on Light Conveyors

A double-acting cylinder swings a diverter gate; at center the exhaust center depressurises both sides, allowing the gate to be moved freely during jam clearing or maintenance.

handyman

Clamp-and-Release with Free Retraction

A clamping unit that must release completely when de-energised: the exhaust center ensures no residual pressure holds the clamp closed, making part changeover safe and predictable.

Is the AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI) the Right Valve?

Choose this 5/3 exhaust-center model when the application needs the cylinder to go limp at mid-stroke—common on manual-load stations or where trapped pressure would be a hazard. If you need the cylinder to hold position at center instead, switch to the 4V230C (closed center); for a pressure-center behavior use the 4V230P. The 4V200 body hits a sweet spot for flow: step down to a 4V100 (Cv 0.6) for compact Ø16–25 mm cylinders, or up to a 4V300 (Cv 1.65) when driving larger bores or demanding faster cycle rates.

When replacing a valve, match five points: body size 4V200, 5/3 exhaust-center function, port size (1/8-inch) and thread type (PT), coil voltage (AC110V), and electrical entry (grommet with flying lead). This valve also mounts on an AirTAC 200-series manifold base if you are building a multi-station valve group.

AirtacDistr lists every 4V230E-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v230e-06-solenoid-valve

Quick checklist

  • ✓ Required flow (Cv) for cylinder & speed
  • ✓ Function: single / double / 5-3 center
  • ✓ Coil voltage (DC24 / AC220 …)
  • ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
  • ✓ Single valve or manifold base?
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 0.8 MPa operating pressure.
  • check Match coil voltage to your controller output.
  • check Use the manual override to test before powering.
  • check Fit silencers or fittings to the exhaust ports.
  • check Wiring by qualified personnel per AirTAC docs.

AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI) FAQ

With an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08), this 5/3 valve suits double-acting cylinders roughly in the Ø32–50 mm range for typical industrial cycle rates. For very small cylinders (Ø16–25 mm) a 4V100-series valve is often a better match, while larger or faster cylinders benefit from the higher Cv of the 4V300 series.

This is a 5/3 exhaust-center valve: when neither solenoid is energised, both cylinder ports are connected to exhaust and the spool springs to the center position. The cylinder is not locked—it can be moved freely by external force. If you need the cylinder to hold its position on power loss, choose a 5/3 closed-center model (4V230C) and add pilot-operated check valves for reliable load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for AirTAC 4V230E-06CI Solenoid Valve, 5/3-way, exhaust center, PT1/8, AC110V, grommet entry (4V230E06CI)

Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for 4V230E06CI and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.