
The AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08A-W) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/4 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230E08A-W is a 5/3-way double-solenoid valve with an exhaust center, built on the 4V200 body and fitted with the -W external-pilot option. At center, both cylinder ports A and B vent to exhaust, so a double-acting cylinder floats free and can be moved by hand or by load - useful for staging, manual positioning and safe de-tensioning between cycles. The -W suffix means pilot air is supplied through a separate external port rather than tapped internally from the main line, so spool switching stays reliable in vacuum circuits and on lines where supply pressure may drop. The AC220V coil draws 4.5 VA and terminates in a terminal box for fixed conduit wiring.
Flow capacity sits at an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) with a maximum cycling rate of 3 cycles per second, and the valve responds in 0.05 s or less. Weighing 360 g in an aluminum-alloy body rated IP65, it suits roughly O32-50 mm bore double-acting cylinders and mounts singly or on an integrated manifold base.
| Model | AirTAC 4V230E-08 Solenoid Valve, 4V200 Series (4V230E08A-W) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Exhaust center lets operators reposition or free-float a double-acting clamp slide between automatic cycles, then the pulsed solenoid signal re-engages it instantly.
The -W external pilot keeps switching dependable on conveyor pusher circuits where main-line pressure sags, venting the cylinder freely at rest so product is not gripped.
On a 4V200 manifold base, the 30E function de-tensions selected actuators at center while neighbouring valves keep working - handy for changeover and purge steps.
Size within the 4V family by cylinder demand: step down to the 4V100 (Cv 0.6) for small bores with modest speed needs, and step up to the 4V300 (Cv 1.65) when a larger bore or faster cycle calls for more flow. Choose this 30E exhaust-center version when the actuator must float at center; pick the 30C closed center to hold position or the 30P pressure center to pre-charge both sides. Pick a single 4V210 when a spring return suffices, or this double-solenoid 4V230 when a pulsed signal must leave the spool in its last position. Single body or manifold base both work - the valve seats on a common supply base for multi-valve stations.
For replacement, match five points: body size (4V200), function (30E), port and thread (1/4" PT), coil voltage (AC220V), entry (terminal) - and confirm the -W external-pilot option so the pilot plumbing on your machine lines up.
Quick checklist
An internally piloted valve taps its switching air from the main supply, so switching can falter when line pressure falls or in vacuum service. The -W version feeds the pilot from a dedicated external port, keeping spool actuation crisp and the 0.05 s response intact even when the main line is weak. You plumb one extra pilot line, and the valve still carries the 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) flow rating of the standard 4V230 body.
At center, ports A and B both connect to exhaust, so a double-acting cylinder is unpressurised on both sides and floats free - it can drift under load or be moved by hand. That is ideal for staging and manual adjustment, but it is not a brake: if your application must hold a suspended or opposing load in the center position, add a pilot-operated check valve at the cylinder ports or a mechanical brake, because this valve alone will not guarantee load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.