
The AirTAC 4V230P-06E Solenoid Valve, 5/3-way, pressure center, PT1/8, AC24V, terminal entry (4V230P06E) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V230P-06E is a 5/3-way pneumatic solenoid valve that directs compressed air to double-acting cylinders and actuators, with a pressure center position. When both solenoids are de-energized, the spool shifts to its center state where both cylinder ports (A and B) receive supply pressure simultaneously. This balanced pressurization can be useful for specific clamping or holding applications where equal force is needed on both sides of the piston at rest.
Built on the mid-flow 4V200 aluminum body, this 1/8in PT-ported valve provides an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and suits cylinders in the ~O32-50 mm range. The AC24V coil draws 5.0 VA, and the valve responds in 0.05 seconds or less. With IP65 protection and a manual override, it integrates easily into manifold groups for compact machine layouts.
| Model | AirTAC 4V230P-06E Solenoid Valve, 5/3-way, pressure center, PT1/8, AC24V, terminal entry (4V230P06E) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure center function applies equal force to both sides of a double-acting cylinder at rest, making it suitable for clamping fixtures where the jaw must hold a part with balanced pressure before the next cycle begins.
In automated assembly cells, the 4V230P-06E controls mid-size actuators for pressing or joining operations. The 5/3 center prevents drift, while the AC24V coil integrates with common industrial control power.
Use this valve to operate a pneumatic gate or stopper on a conveyor line. The pressure center holds the gate in a defined position when idle, and the 0.05-second response ensures crisp actuation for product spacing.
Choose the 4V230P-06E when your application requires a 5/3 valve with a pressure center—both A and B ports are pressurized at rest. This is distinct from the closed-center (30C) which blocks all ports, and the exhaust-center (30E) which vents both cylinder ports. For smaller O20-25 mm cylinders, the 4V100 series (Cv 0.6) may be a better fit; for larger O40-63 mm bores needing faster cycles, step up to the 4V300 (Cv 1.65).
When replacing an existing valve, match these five points: body size (4V200), function (5/3 pressure center), port size and thread (1/8in PT), coil voltage (AC24V), and electrical entry (terminal box). This model can be mounted on a sub-base individually or ganged on a common manifold to simplify piping and save space.
Quick checklist
With an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08), this 5/3 valve suits double-acting cylinders roughly in the O32-50 mm range. For smaller O20-25 mm cylinders, a 4V100 series valve (Cv 0.6) is more economical; for larger or faster O40-63 mm cylinders, consider the 4V300 series (Cv 1.65).
The 'P' in 4V230P denotes a pressure center. When neither solenoid is energized, the spool moves to its middle position where both the A and B ports are connected to the supply pressure. This pressurizes both sides of the cylinder piston simultaneously. Note that this is not a safety-rated load-holding function; for suspended loads, add a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.