
The AirTAC 4V310-10 Solenoid Valve, 4V300 Series (4V31010B-AM) is a genuine 5/2-way single solenoid (spring return) solenoid valve with PT3/8 ports and an effective area of 28.0 mm² (Cv 1.65). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V31010B-AM is a 4V310 single-solenoid 5/2 valve in the AirTAC 4V300 body class, built to switch compressed air between the two sides of double-acting cylinders and pneumatic actuators. Energise the coil and the valve shifts; cut the DC24V supply and the internal spring returns the spool to its rest position, so the cylinder direction always follows a constant electrical signal. This variant carries the -AM factory option: an AMISCO (Italian) solenoid coil replaces the standard coil, while the body, ports and flow remain identical to the base 4V310-10B.
Rated at 28 mm2 effective area (Cv 1.65) with a 3/8in PT inlet and outlet exhausting through 1/4in, it is sized for bores around 50-80 mm and cycles at up to 4 per second with a response of 0.05 s or better. The aluminium body weighs just 310 g and the terminal-box entry keeps wiring simple on machines that use customer-supplied conduit. Please confirm the exact AMISCO coil rating in VA/W for your ordered voltage with us before panel design.
| Model | AirTAC 4V310-10 Solenoid Valve, 4V300 Series (4V31010B-AM) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | PT3/8 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 28.0 mm² (Cv 1.65) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 4 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 310 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 28.0 mm² |
|---|---|
| Flow coefficient | Cv 1.65 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -10 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
Spring-return 5/2 control of clamp and slide cylinders up to about 80 mm, where a lost 24V signal safely returns the spool and retracts the actuator.
Banked on a 4V300 base plate beside other 3-series valves, the 310 g body keeps compact control cabinets on packaging and assembly lines tidy.
Directs air to double-acting lift and push cylinders on conveyors and handling fixtures, with the 1.65 Cv flow keeping mid-size bores moving at speed.
Choose this valve when a 50-80 mm double-acting cylinder needs a spring-return signal valve: step down to the 4V200 (Cv 1.0) for smaller bores, or up to the 4V400 (Cv 2.82) for larger ones. Pick a double-solenoid 4V320 instead if you need the valve to remember its position after a power cut, or a 5/3 4V330C/E/P when the cylinder must hold, float or stay pressured at center. A single valve suits one actuator; add a manifold base to bank several 4V300 valves into one compact group. For a like-for-like replacement, match five points: body size 4V300, function (10/20/30x), port and thread (1/4in or 3/8in in PT, G or NPT), coil voltage, and electrical entry (terminal or grommet) - and note the -AM suffix so you receive the AMISCO-coil version.
Quick checklist
It is a 5/2 valve for double-acting cylinders and actuators, best matched to bores around 50-80 mm. Flow capacity is 28 mm2 effective area, equal to Cv 1.65, with 3/8in PT inlet and outlet ports and 1/4in exhausts.
-AM means the valve is fitted with an AMISCO (Italian) solenoid coil instead of the standard AirTAC coil; the valve function, ports and flow are unchanged. This unit runs on DC24V via a terminal box. We do not publish the AMISCO coil's VA/W figure, so please confirm the exact coil rating with us.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.