
The AirTAC 4V320-10AI Solenoid Valve, 5/2-way, PT3/8, AC220V, grommet entry (4V32010AI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT3/8 ports and an effective area of 28.0 mm² (Cv 1.65). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V320-10AI is a 5/2-way double-solenoid pneumatic directional valve built on the 4V300 body platform. It directs compressed air to double-acting cylinders and actuators, and because it is a dual-coil design, the spool stays in its last commanded position when power is removed—no spring, no holding current, just a true memory function. This makes it ideal for circuits where the actuator must remain in place during an E-stop or power cycle without shifting unexpectedly.
This particular SKU arrives pre-wired for convenience: the 'I' in the code denotes a grommet-style electrical entry with a 0.5 m flying lead, and the 'A' specifies an AC220V coil drawing 4.5 VA. With a 3/8" PT port (exhaust is 1/4") and an effective area of 28.0 mm² (Cv 1.65), it suits ~O50-80 mm bore cylinders. Response time is 0.05 s or less, and the IP65-rated enclosure keeps the wiring protected in washdown or dusty environments.
| Model | AirTAC 4V320-10AI Solenoid Valve, 5/2-way, PT3/8, AC220V, grommet entry (4V32010AI) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT3/8 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 28.0 mm² (Cv 1.65) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 4 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 400 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 28.0 mm² |
|---|---|
| Flow coefficient | Cv 1.65 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -10 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
In palletizers or transfer lines where a cylinder must hold a stop pin or gate in position during an E-stop, the 4V320-10AI's memory function prevents the load from drifting, keeping the line safe until power is restored.
For welding fixtures or assembly clamps that grip a part, this double-solenoid valve maintains clamping force even when the machine powers down, eliminating the need for a constant holding signal and reducing coil heat.
In a pneumatic press cycle where the ram must stay retracted after a power interruption, the 4V320-10AI's memory holds the spool in the retract position, preventing the tool from dropping when the system restarts.
Choose the 4V320-10AI when you need a 5/2 valve that holds position on power loss and prefer the simplicity of a pre-wired AC220V connection. The 4V300 body slots between the smaller 4V200 (Cv 1.0) for compact actuators and the larger 4V400 (Cv 2.82) for heavy-duty cylinders. If your application requires a spring-return action that defaults to a safe state on power-off, step down to the single-solenoid 4V310. For manifold mounting, confirm your base matches the 4V300 footprint and port spacing. When replacing an existing valve, match all five points: 4V300 body, 5/2 double-solenoid function, 3/8" PT thread, AC220V coil, and grommet flying-lead entry.
AirtacDistr lists every 4V320-10 order code with its price on one page at https://airtacdistr.com/products/airtac-4v320-10-solenoid-valve
Quick checklist
With a Cv of 1.65 and 28.0 mm² effective area, this 4V300-series valve is well-matched to double-acting cylinders in the ~O50 to 80 mm bore range. For smaller O32-40 mm cylinders, a 4V200 (Cv 1.0) may provide more precise speed control, while larger O100+ mm bores typically benefit from stepping up to a 4V400 body.
The 4V320 uses two separate coils. A momentary signal to coil A shifts the spool and connects pressure to one cylinder port; a signal to coil B shifts it the other way. When neither coil is energized, the spool simply stays where it was last placed by land friction and balanced pressure—there is no spring to move it and no magnetic latching. This means the cylinder holds its position through a power loss, but for true load-holding safety, a pilot-operated check valve or mechanical brake should be added at the cylinder ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.