
The AirTAC 4V330P-10F Solenoid Valve, 5/3-way, pressure center, PT3/8, DC12V, terminal entry (4V330P10F) is a genuine 5/3-way 5/3 double solenoid — pressure center solenoid valve with PT3/8 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V330P-10F is a 5/3-way double-solenoid valve that, when de-energized, centers its spool to pressurize both cylinder ports simultaneously. This pressure-center configuration is ideal for applications where a double-acting cylinder must resist external forces in its mid-stroke position without drifting, offering a balanced state that isn't simply blocked or exhausted.
Designed for the 4V300 body class, this DC12V model draws just 2.5 W of power and delivers an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10). It suits pneumatic cylinders in the ~50-80 mm bore range, providing a fast response time of 0.05 seconds or less. The aluminum alloy body, IP65 protection, and PT (Rc) threaded 3/8-inch ports make it a robust, ready-to-install unit for industrial automation.
| Model | AirTAC 4V330P-10F Solenoid Valve, 5/3-way, pressure center, PT3/8, DC12V, terminal entry (4V330P10F) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Pressure center |
| Port size | PT3/8 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -10 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
In a press-fit station, the pressure-center position holds the ram with balanced force mid-stroke, preventing it from dropping onto the part before the final insertion command is given.
For a conveyor-mounted stop gate, pressurizing both sides of the cylinder at center creates a stiff, resistive hold, keeping the gate firmly in place against the weight of accumulated products.
Used in a web-tensioning system, the 4V330P-10F applies balanced pressure to a dancer arm cylinder, maintaining constant tension on the material without the drift that an exhaust-center valve would allow.
Choose the 4V330P-10F when your double-acting cylinder needs a controlled stop with both sides under pressure, preventing a load from being easily back-driven at center. This 5/3 pressure-center function is distinct from the closed-center (which blocks all ports) and exhaust-center (which floats the cylinder). If your cylinder bore is below 40 mm, the smaller 4V200 series (Cv 1.0) may offer a more economical fit; for bores above 100 mm, step up to the 4V400 series (Cv 2.82). When replacing an existing valve, match all five points: the 4V300 body size, the 5/3 pressure-center function, the 3/8-inch PT port, a DC12V coil, and the standard terminal box electrical entry.
AirtacDistr lists every 4V330P-10 order code with its price on one page at https://airtacdistr.com/products/airtac-4v330p-10-solenoid-valve
Quick checklist
In the de-energized center position, the valve supplies air pressure to both cylinder ports (A and B) while blocking the exhaust. This creates a balanced force that resists movement from external loads, holding the actuator stiffly in place, unlike an exhaust-center valve which would allow it to float.
With a Cv of 1.25, the 4V330P-10F is best paired with cylinders in the ~50-80 mm bore range. While it can physically pilot a 100 mm cylinder, the cycle speed will be slower. For optimal performance on larger bores, consider moving up to the 4V400 series which offers a higher flow capacity (Cv 2.82).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.