
The AirTAC 4V420-15BI Solenoid Valve, 5/2-way, PT1/2, DC24V, grommet entry (4V42015BI) is a genuine 5/2-way double solenoid (memory) solenoid valve with PT1/2 ports and an effective area of 48.0 mm² (Cv 2.82). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V420-15BI is a 5/2-way double-solenoid pneumatic directional valve built on the largest 4V body size. It directs compressed air to both sides of a double-acting cylinder, and its memory spool holds the last pulsed position when electrical power is removed—no spring return and no holding current required. With an effective area of 48.0 mm² (Cv 2.82) and a maximum cycling rate of 3 cycles per second, it comfortably supplies Ø80–125 mm bore cylinders in high-flow circuits.
This specific configuration comes pre-wired with a 0.5 m flying lead through a DIN-style grommet (code I) and a DC24V coil drawing just 3.0 W. The IP65-rated aluminium body weighs 720 g, responds in 0.05 s or less, and operates on filtered, unlubricated air from 0.15–0.8 MPa. It is a genuine AirTAC 4V400-series valve, ready for manifold mounting or stand-alone use with 1/2 in PT ports.
| Model | AirTAC 4V420-15BI Solenoid Valve, 5/2-way, PT1/2, DC24V, grommet entry (4V42015BI) |
|---|---|
| Series | 4V400 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | PT1/2 |
| Exhaust port | PT1/2 |
| Effective area (Cv) | 48.0 mm² (Cv 2.82) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 720 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 48.0 mm² |
|---|---|
| Flow coefficient | Cv 2.82 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 4 | Body size (4V400) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -15 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V410 (single), 4V420 (double), 4V430C/E/P (5/3 center). Add the voltage suffix when ordering.
Pulse the 4V420-15BI once to extend a Ø100 mm transfer cylinder; the spool stays shifted even if the PLC output drops, keeping the part in place until the retract signal fires.
A momentary 24 V pulse engages a big-bore clamp. The memory spool holds clamping force without coil heating, saving energy and preventing thermal drift in long-cycle welding jigs.
Control a 125 mm forming press cylinder with short electrical commands. The 0.05 s response and Cv 2.82 flow deliver crisp direction changes, while the grommet lead simplifies wiring inside crowded control cabinets.
Choose the 4V420-15BI when your application needs a double-acting cylinder to stay put after a short electrical pulse—the dual-solenoid memory function eliminates the need for a continuous holding signal. The 4V400 body’s Cv of 2.82 makes it the right step up from the 4V300 (Cv 1.65) for bores above 63 mm; if your cylinder exceeds 125 mm or demands still higher flow, consider a larger valve series or a manifold bank. For a fail-to-home position on power loss, switch to the spring-return 4V410. When replacing an existing valve, match all five points: 4V400 body size, 5/2 double-solenoid function, 1/2 in PT thread, DC24V coil, and grommet electrical entry.
AirtacDistr lists every 4V420-15 order code with its price on one page at https://airtacdistr.com/products/airtac-4v420-15-solenoid-valve
Quick checklist
With an effective area of 48.0 mm² (Cv 2.82), it suits double-acting cylinders roughly Ø80–125 mm. For smaller bores (Ø40–63 mm) a 4V300-series valve (Cv 1.65) often provides a better speed match.
The spool is shifted by a momentary electrical pulse to either solenoid. When power is removed, balanced pressure and land friction hold the spool in its last commanded position—there is no spring, no holding current, and no magnetic latching. The valve will stay put until the opposite solenoid receives a pulse.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.