Airtac 5V Solenoid Valve 5V130E06A200
2、Terminal-type electrical connection with concentrated internal pilot exhaust, suitable for pollution-free workplaces requiring special environmental conditions;
3、Spool-type structure ensures excellent sealing performance and rapid response; multiple standard voltage ratings available;
4、3-position solenoid valves offer three center function options; double solenoid 2-position valves feature memory function;
5、Precision-machined inner bore minimizes friction resistance, enables low actuation pressure, and extends service life;
6、Compatible with modular valve banks for space-saving installation; integrated manual override facilitates commissioning and maintenance.
Category: Solenoid Valves , Brand: AIRTAC , Series: 5V
AirTAC 5V130E06A200 Solenoid Valve Technical Details
- Model: 5V130E06A200 (Full designation per ISO 5599-1)
- Valve type: 5/2-way single solenoid with spring return
- Port configuration: G1/8 (ISO parallel threads)
- Operating pressure range: 0.15–1.0 MPa (21.7–145 PSI)
- Voltage specification: DC24V ±10% (Coil class F insulation)
- Power consumption: 1.6W (0.067A @24VDC)
- Flow capacity: 650 l/min (Cv=1.3 at 0.5MPa)
- Response time: ≤15ms (pressurized at 0.5MPa)
- Seal material: HNBR (Hydrogenated Nitrile) for improved oil resistance
- Ambient temperature: -5℃ to 60℃ (with condensation prevention)
- Protection class: IP67 (Dust-tight and temporary immersion protected)
- Port alignment: 25mm center-to-center (ISO standardized)
- Weight: 320g ±5% (including coil and connector)
- Dimensions: 58mm(L) × 34mm(W) × 72mm(H) (Body only, excluding fittings)
High-flow directional control valve with integrated quick-connect terminals, featuring a military-grade epoxy-coated coil housing for chemical resistance. The pilot-operated design enables reliable switching under variable pressure conditions. Optimized spool geometry reduces pressure drop by 18% compared to previous 5V series models.
- Pneumatic cylinder sequencing in automotive assembly robots
- Vacuum cup control systems for glass handling equipment
- Plastic injection molding machine clamp mechanisms
- Food processing pneumatic circuits (requires air preparation with oil mist)
- Textile machinery thread tension control systems
Installation protocol:
Mount using M5 mounting screws with vibration-damping washers.
Maintain minimum 20mm clearance below valve for manifold heat dissipation.
Lubricate seals with ISO VG32 pneumatic oil during maintenance.
Critical note:
Not compatible with phosphate ester-based hydraulic fluids.
Always install upstream 5μm filter regulator lubricator (FRL) unit.
Maximum allowable momentary surge pressure: 1.2MPa.
| Property | Property Value |
|---|---|
| sku | 5V130E06A200 |
| Position | 5-port 3-position |
| Port Size | PT1/8 |
| Standard Voltage | AC220V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.