Airtac 6HV Manifold Solenoid Valve 6HV100M10F
Genuine AirTAC din rail manifold, order code 6HV100M10F from the 6HVM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Series6HV100M, for 6HV100 valves
- Stations9 to 10 valves (10F)
- Rail length245 mm
- RailStandard DIN rail
- Supply / exhaustPush-in Φ8 (6HV0500M), Φ10 (6HV100M)
- Valve portsM5 (6HV0500), M5 or 1/8" (6HV100)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV100M10F
The AirTAC 6HV100M10F is the DIN rail set for a bank of 9 or 10 6HV100 manifold solenoid valves on a 245 mm length of standard DIN rail. The valves share one supply and one exhaust module fed by Dia 10 push-in connections, and each valve sits on an M5 or 1/8 inch port depending on how the 6HV100 valve is ordered. AirTAC discontinued the 6HV series in January 2026 and has not named a replacement, so request a quote with the order code and we will confirm whether this rail set can still be supplied.
Ten stations is the upper limit of the one-module rule: only banks above 10 stations receive a second supply/exhaust module at the opposite end of the rail to prevent supply pressure being lost along the bank. A full 6HV100M10F bank therefore runs from a single Dia 10 supply and a single Dia 10 exhaust connection.
Airtac 6HV Manifold Solenoid Valve 6HV100M10F Technical Specifications
| Order code | 6HV100M10F |
|---|---|
| Product | DIN Rail Manifold |
| Series | 6HV100M, for 6HV100 valves |
| Stations | 9 to 10 valves (10F) |
| Rail length | 245 mm |
| Rail | Standard DIN rail |
|---|---|
| Supply / exhaust | Push-in Φ8 (6HV0500M), Φ10 (6HV100M) |
| Valve ports | M5 (6HV0500), M5 or 1/8" (6HV100) |
| Stations | 2 – 24 |
| Supply modules | One up to 10 stations, two above 10 |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), DIN rail ordering code and dimensions. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
Take 6HV100M10F when your 6HV100 bank needs 9 or 10 valves; smaller banks use 6HV100M4F (2 to 4), 6F (5 to 6) and 8F (7 to 8), while 12F through 24F cover 11 to 24 valves and add a second supply/exhaust module. If your valves are the smaller 6HV0500 type, use the 6HV0500M series with its Dia 8 push-in supply instead.
Applications
Machine section valve bank
Nine or ten M5 or 1/8 inch port valves controlling clamp, lift and eject functions on one transfer or assembly machine section, all on a 245 mm rail.
Multi-point clamping fixture
A ten-station bank where each 6HV100 valve drives one clamp cylinder, sharing a single Dia 10 push-in supply and a single exhaust.
Line-end sorting manifold
Nine to ten valves switching diverters and kickers at the end of a conveyor, grouped on one DIN rail and fed from one supply module.
FAQ
What figures define the 6HV100M10F order code?
6HV100M is the DIN rail set for 6HV100 valves; 10F means it takes 9 to 10 valves. The rail is 245 mm long and the set comes with one supply/exhaust module and one end block, since two modules are only used above 10 stations. Supply and exhaust are Dia 10 push-in and the valve ports are M5 or 1/8 inch. The series covers 2 to 24 stations in total.
Is the 6HV100M10F still available?
AirTAC discontinued the 6HV series in January 2026 and has not named a replacement. We make no supply promise; request a quote with the order code and we will confirm whether this rail set can still be supplied.