Airtac 6HV Manifold Solenoid Valve 6HV100M4F
Genuine AirTAC din rail manifold, order code 6HV100M4F from the 6HVM range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Series6HV100M, for 6HV100 valves
- Stations2 to 4 valves (4F)
- Rail length140 mm
- RailStandard DIN rail
- Supply / exhaustPush-in Φ8 (6HV0500M), Φ10 (6HV100M)
- Valve portsM5 (6HV0500), M5 or 1/8" (6HV100)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 6HV Manifold Solenoid Valve 6HV100M4F
The 6HV100M4F is the entry code of the 6HV100M DIN rail table, carrying 2 to 4 6HV100 manifold solenoid valves on a 140 mm length of standard DIN rail. Since the bank stays within the 10-station limit, a single supply and exhaust module with one end block feeds every valve through Dia 10 push-in connections, and each 6HV100 valve ports at M5 or 1/8 inch.
AirTAC discontinued the 6HV series in January 2026 and has not named a replacement. Request a quote with the order code 6HV100M4F and we will confirm whether this rail can still be supplied.
Airtac 6HV Manifold Solenoid Valve 6HV100M4F Technical Specifications
| Order code | 6HV100M4F |
|---|---|
| Product | DIN Rail Manifold |
| Series | 6HV100M, for 6HV100 valves |
| Stations | 2 to 4 valves (4F) |
| Rail length | 140 mm |
| Rail | Standard DIN rail |
|---|---|
| Supply / exhaust | Push-in Φ8 (6HV0500M), Φ10 (6HV100M) |
| Valve ports | M5 (6HV0500), M5 or 1/8" (6HV100) |
| Stations | 2 – 24 |
| Supply modules | One up to 10 stations, two above 10 |
Source: AirTAC 6HV series datasheet (airtac.com discontinued products), DIN rail ordering code and dimensions. AirTAC lists the 6HV series as discontinued (January 2026).
How to choose
There is no smaller code in the series, so 4F is the minimum bank size for the 6HV100M rail. Step up to 6HV100M6F for 5 to 6 valves on a 175 mm rail, or to 6HV100M12F for 11 to 12 valves, where a second supply and exhaust module is added at the far end. The series choice is fixed by the valve: 6HV100M fits 6HV100 valves, while 6HV0500 valves need the 6HV0500M rail.
Applications
Test rig and pilot fixture actuation
A few 6HV100 valves on a 140 mm rail give a lab or prototype fixture a tidy manifold with Dia 10 push-in supply and exhaust and no unused rail length.
Small machine retrofit
Replacing loose M5 or 1/8 inch ported valves in an older machine with a 2 to 4 valve DIN rail bank consolidates piping around one supply and exhaust module.
Compact control cabinet build
Machine builders can fit the 140 mm rail into tight cabinets where a full-length manifold will not go, still clipping valves onto standard DIN rail.
FAQ
What are the key figures for the 6HV100M4F?
It carries 2 to 4 6HV100 valves (4F) on a 140 mm standard DIN rail. Supply and exhaust are Dia 10 push-in, valve ports are M5 or 1/8 inch, and since the bank is within 10 stations it uses one supply and exhaust module with one end block.
Is the 6HV series still available from AirTAC?
No. AirTAC discontinued the 6HV series in January 2026 and has not named a replacement series. Send a quote request with the order code 6HV100M4F and we will confirm whether this DIN rail set can still be supplied.