Airtac 7V-F Solenoid Valve Manifold 7V200M12F
2、Centralized air inlet/exhaust ports and integrated wiring simplify troubleshooting during maintenance:
3、Flexible modular configuration with expandable design - Allows arbitrary combination and expansion of connected directional control valves quantity;
Category: Solenoid Valve Bases , Brand: AirTAC , Series: 7V-F
AirTAC 7V-F Series Valve Manifold Base 7V200M12F Technical Details
- Model: 7V200M12F (7V-F Series Modular Base)
- Mounting Type: ISO 15407-1 compliant modular manifold system
- Port Configuration: 2/2-way normally closed (compatible with 7V-F valve cartridges)
- Port Thread: M12 × 1.25 female threads (ISO 228-1 standard)
- Max Operating Pressure: 1.0 MPa (145 psi)
- Voltage Compatibility: Designed for use with 7V-F series valves (DC12V/24V/AC110V/AC220V coils)
- Flow Capacity: Cv 1.8 (at 0.5 MPa pressure differential)
- Seal Material: HNBR (Hydrogenated Nitrile) for enhanced chemical resistance
- Temperature Range: -20℃ to 80℃ (with intermittent peaks up to 100℃)
- Weight: 328g ±5g (including mounting hardware)
- Dimensions: 89mm(L) × 35mm(W) × 24mm(H) (single station size)
- Surface Finish: Anodized aluminum body with MIL-A-8625 Type III coating
- Response Time: <15ms (when paired with compatible solenoid valves)
- Leakage Rate: <3 bubbles/min (tested with 0.6 MPa air pressure)
High-density extruded aluminum manifold base featuring multi-station expandability (up to 20 stations) with integrated air passageways. The T-slot design enables tool-free valve cartridge installation and supports centralized exhaust configurations. Includes built-in mounting points for DIN rail (35mm) or direct panel mounting.
- Multi-axis pneumatic actuator control in CNC machinery
- Modular assembly lines requiring sequential valve operation
- Cleanroom-compatible automation systems (low particulate design)
- Plastic injection molding machine clamp controls
- High-cycle packaging equipment (rated for >10 million operations)
Installation Protocol:
Apply 3-5Nm torque during valve cartridge installation. Use only PTFE-based lubricant on O-rings.
For multi-station setups, install end plates (7V-EP) to prevent air leakage. Maintain ambient humidity below 85% RH.
| Property | Property Value |
|---|---|
| sku | 7V200M12F |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.