Airtac 7V Solenoid Valve 7V0520M5F050
Genuine AirTAC solenoid valve, order code 7V0520M5F050 from the 7V0520 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- PortM5
- Coil voltageDC12V (F)
- Lead wireLead 0.5 m (050)
- Function5/2-way double solenoid (double solenoid with memory)
- PortsM5, Ø4 mm push-in (J04)
- Effective area3.4 mm² (Cv 0.2) on M5
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 7V Solenoid Valve 7V0520M5F050
Weighing 45 g, the AirTAC 7V0520M5F050 is a 5/2-way double-solenoid valve with M5 supply, outlet and exhaust ports. A pulse on either coil shifts the spool and it stays there until the other coil is pulsed, so it keeps its position through a power cut. The catalog flow on M5 is 3.4 mm2 (Cv 0.2). The DC12V coil (code F) draws 0.7 W, is class F and dust-protected, responds in 0.05 s or less and plugs in horizontally or vertically; the 050 code gives a 0.5 m lead.
It is pilot operated from 0.15 to 0.8 MPa (21-114 psi) on air filtered to 40 um, proof pressure 1.2 MPa, -10 to +50 C, at up to 5 cycles/s, and weighs 45 g. The die-cast aluminum-alloy body collects the pilot exhaust and vents it through the R and S ports. No lubrication is needed; once lubricated air is used, keep using it with ISO VG32 oil.
Airtac 7V Solenoid Valve 7V0520M5F050 Technical Specifications
| Order code | 7V0520M5F050 |
|---|---|
| Product | Solenoid Valve |
| Port | M5 |
| Coil voltage | DC12V (F) |
| Lead wire | Lead 0.5 m (050) |
| Function | 5/2-way double solenoid (double solenoid with memory) |
|---|---|
| Ports | M5, Ø4 mm push-in (J04) |
| Effective area | 3.4 mm² (Cv 0.2) on M5 |
| Weight | 45 g |
| Max frequency | 5 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
| Pilot | Internal |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the M5 port.
How to choose
Within the 7V0520, AC220V, DC24V and AC110V coils replace the F with A/B/C; 7V0520M5F200 has the 2.0 m lead; the other ports of this body are Dia 4 mm push-in (7V0520J04F050). The same body comes as 7V0510, 7V0530C, 7V0530E and 7V0530P: 10 single solenoid, 20 double solenoid, 30C/30E/30P the 5/3-way centers. Several 7V0500 valves can share a 7V0500M manifold base of 1 to 20 stations.
Applications
Holds position on power loss
A pulse from a 12 V DC supply switches the cylinder and the valve keeps that position until the other coil is pulsed.
Machine pneumatics
Cv 0.2 on M5 suits small cylinders and pilot lines in tight spaces.
DC12V control circuits
The DC12V coil connects to a 12 V DC supply; the 0.5 m lead plugs into the coil terminal.
FAQ
What are the key figures of the 7V0520M5F050?
5/2-way double-solenoid valve, 7V0500 series; M5 ports; catalog flow 3.4 mm2 (Cv 0.2); 0.15-0.8 MPa (21-114 psi), proof 1.2 MPa; -10 to +50 C; up to 5 cycles/s; DC12V coil, 0.7 W, class F; 0.5 m lead; response 0.05 s or less; 45 g.
What does the 7V0520M5F050 do with the coils off?
A pulse on either coil shifts the spool and it stays there until the other coil is pulsed, so it keeps its position through a power cut.