Airtac 7V Solenoid Valve 7V130E06C050
Genuine AirTAC solenoid valve, order code 7V130E06C050 from the 7V130E range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- PortPT1/8
- Coil voltageAC110V (C)
- Lead wireLead 0.5 m (050)
- Function5/3-way exhaust center (double solenoid, outlets vented in the center position)
- PortsPT1/8, Ø4 mm push-in (J04), Ø6 mm push-in (J06), Ø8 mm push-in (J08)
- Effective area7.0 mm² (Cv 0.41) on PT1/8 (catalog value for 7V130C)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac 7V Solenoid Valve 7V130E06C050
Weighing 100 g, the AirTAC 7V130E06C050 is a 5/3-way exhaust-center solenoid valve with PT1/8 supply, outlet and exhaust ports. With both coils off the spool centers and vents both outlets, so the cylinder can be moved by hand. The catalog flow for the 7V130C on PT1/8 is 7.0 mm2 (Cv 0.41). The AC110V coil (code C) draws 1.1 VA, is class F and dust-protected, responds in 0.05 s or less and plugs in horizontally or vertically; the 050 code gives a 0.5 m lead.
It is pilot operated from 0.2 to 0.8 MPa (29-114 psi) on air filtered to 40 um, proof pressure 1.2 MPa, -10 to +50 C, at up to 3 cycles/s, and weighs 100 g. The die-cast aluminum-alloy body collects the pilot exhaust and vents it through the R and S ports. No lubrication is needed; once lubricated air is used, keep using it with ISO VG32 oil.
Airtac 7V Solenoid Valve 7V130E06C050 Technical Specifications
| Order code | 7V130E06C050 |
|---|---|
| Product | Solenoid Valve |
| Port | PT1/8 |
| Coil voltage | AC110V (C) |
| Lead wire | Lead 0.5 m (050) |
| Function | 5/3-way exhaust center (double solenoid, outlets vented in the center position) |
|---|---|
| Ports | PT1/8, Ø4 mm push-in (J04), Ø6 mm push-in (J06), Ø8 mm push-in (J08) |
| Effective area | 7.0 mm² (Cv 0.41) on PT1/8 (catalog value for 7V130C) |
| Weight | 100 g |
| Max frequency | 3 cycles/s |
| Fluid | Air (filtered by 40 µm element) |
| Pilot | Internal |
| Operating pressure | 0.2 – 0.8 MPa (29 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -10 to +50 °C |
| Coil power | AC 1.1 VA · DC 0.7 W |
| Voltage tolerance | AC +15% / -10%, DC ±10% |
| Insulation | Class F, dust-protected |
| Body | Aluminum alloy |
| Lubrication | Not required |
Source: AirTAC catalog P80, 7V series specifications and ordering code. Effective area is the catalog figure for the PT1/8 port.
How to choose
Within the 7V130E, AC220V, DC24V and DC12V coils replace the C with A/B/F; 7V130E06C200 has the 2.0 m lead; the other ports of this body are Dia 4 mm push-in (7V130EJ04C050), Dia 6 mm push-in (7V130EJ06C050) and Dia 8 mm push-in (7V130EJ08C050). The same body comes as 7V110, 7V120, 7V130C and 7V130P: 10 single solenoid, 20 double solenoid, 30C/30E/30P the 5/3-way centers. PT threads are standard; G (BSPP) and NPT are marked G and T at the end of the code. Several 7V100 valves can share a 7V100M manifold base of 1 to 20 stations.
Applications
Free cylinder in the center
Both coils off vents the outlets, so the cylinder can be pushed by hand for setup.
Machine pneumatics
Cv 0.41 on PT1/8 suits small and medium cylinders.
AC110V control circuits
The AC110V coil connects to a 110 V AC control circuit; the 0.5 m lead plugs into the coil terminal.
FAQ
What are the key figures of the 7V130E06C050?
5/3-way exhaust-center solenoid valve, 7V100 series; PT1/8 ports; catalog flow 7.0 mm2 (Cv 0.41); 0.2-0.8 MPa (29-114 psi), proof 1.2 MPa; -10 to +50 C; up to 3 cycles/s; AC110V coil, 1.1 VA, class F; 0.5 m lead; response 0.05 s or less; 100 g.
What does the 7V130E06C050 do with the coils off?
With both coils off the spool centers and vents both outlets, so the cylinder can be moved by hand.