Airtac ACE Compact Cylinder ACE100X10S
The AirTAC Airtac ACE Compact Cylinder ACE100X10S is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke10 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X10S
This AirTAC ACE100X10S is a double acting ISO 21287 compact cylinder, delivering a 3927 N push force at 0.5 MPa from its 100 mm bore. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting into tight machine frames where a full-length unit cannot go.
With a 10 mm stroke, this model is built for precise, short-travel motions. The optional -S magnet is fitted here, so CMSE or DMSE reed and solid-state switches can be mounted for position sensing. For a safe working load, plan for about 2356 N (0.6 times the push force) at 0.5 MPa, which translates to lifting roughly 240 kg vertically with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE100X10S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X10S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X10S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X10S Is Used
Die Casting Ejector
Use the ACE100X10S to eject cast parts from a die with a short, powerful 10 mm stroke, leveraging 3927 N push at 0.5 MPa to break the part free.
Press Platen Stop
In a stamping press, this cylinder can act as a positive stop for the platen, using its 100 mm bore to hold position during the cycle with air pressure applied.
Pallet Clamp
On an automated conveyor, mount the ACE100X10S to clamp pallets in place for precise positioning, with the 10 mm stroke providing quick engagement and release.
Is the Airtac ACE Compact Cylinder ACE100X10S the Right Cylinder?
For a 100 mm bore, this cylinder provides high force in a compact package. If your application needs less force, consider the 80 mm bore ACE80X10S with 2513 N push at 0.5 MPa; for more, the 125 mm bore ACE125X10S offers 6136 N push. The 10 mm stroke suits short indexing or clamping tasks, and the fixed TPU bumper at both ends absorbs end-of-stroke energy without adjustment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X10S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa.
The ACE100X10S body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight spaces. It has a hard-anodized aluminium body and a fixed TPU bumper at both ends, which absorbs end-of-stroke impact. The optional -S magnet is fitted, allowing CMSE or DMSE switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.