Airtac ACE Compact Cylinder ACE100X15SB
The AirTAC Airtac ACE Compact Cylinder ACE100X15SB is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X15SB
This AirTAC ACE100X15SB is a double acting ISO 21287 compact cylinder delivering a 3927 N push force at 0.5 MPa from its 100 mm bore. The 15 mm stroke suits short-travel indexing tasks, and the fixed TPU bumper at each end absorbs impact within the 30-500 mm/s speed range.
The hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, freeing space in tight machine frames. The male rod thread (B code) simplifies direct coupling, and the fitted -S magnet enables CMSE or DMSE switch mounting for position sensing. For a 2:1 safety margin, plan to lift about 200 kg vertically with this unit at 0.5 MPa, not the full 3927 N rating.
Airtac ACE Compact Cylinder ACE100X15SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X15SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X15SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X15SB Is Used
Press Ram
Use as a short-stroke press ram in a stamping die to deliver 3927 N of force for embossing or marking operations on metal parts.
Conveyor Stop
Mount vertically at a conveyor station to lift and position pallets precisely, with the 15 mm stroke providing quick, repeatable stops.
Clamping Fixture
In a welding jig, this cylinder holds components firmly with 3927 N push force, while the compact body fits between clamps without interfering with torch access.
Is the Airtac ACE Compact Cylinder ACE100X15SB the Right Cylinder?
For lighter duty at 80 mm bore, the ACE80X15 offers 2513 N push, while stepping up to 125 mm bore gives 6136 N push at 0.5 MPa. This 100 mm bore model balances high force with compact mounting, ideal when space is limited but thrust requirements are substantial. The 1/4" port matches standard industrial fittings, and the male rod thread accepts common couplings without adapters.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X15SB FAQ
At 0.5 MPa, push is 3927 N and pull is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa.
The short body saves about 50% of the mounting length compared to an ISO 15552 profile cylinder, allowing installation in tight spaces. The fixed TPU bumper absorbs end-of-stroke impact, and the optional -S magnet enables CMSE or DMSE switch mounting for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X15SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.