Airtac ACE Compact Cylinder ACE100X20SH
The AirTAC Airtac ACE Compact Cylinder ACE100X20SH is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 20mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke20 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X20SH
This AirTAC ACE100X20SH is a double acting compact cylinder that delivers a 3927 N push force at 0.5 MPa, making it a strong choice for heavy clamping and pressing tasks. Its short ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length unit will not. The 20 mm stroke suits short, rapid movements, and the fixed TPU bumper at each end absorbs impact to protect the tooling.
The hard-anodized aluminium body resists wear in continuous cycling, while the S45C hard-chrome rod stands up to sliding friction. This model carries the optional -S magnet, so you can fit CMSE or DMSE reed and solid-state switches for position sensing. For a real-world load, plan on about 240 kg of safe vertical lift at 0.5 MPa when you apply a 2:1 margin to the 3927 N rating, which helps you match a genuine part weight without over-specifying.
Airtac ACE Compact Cylinder ACE100X20SH Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X20SH |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X20SH
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X20SH Is Used
Heavy Clamping Fixture
Use the 3927 N push at 0.5 MPa to clamp thick steel plates in a CNC milling fixture, with the short body fitting under a low workholding envelope.
Press Ram for Small Parts
Drive a 20 mm stroke press ram to crimp electrical terminals or insert bushings, relying on the fixed TPU bumper to reduce end-of-stroke shock on the die.
Stop Gate on a Pallet Line
Mount this cylinder as a stop gate on an automated pallet conveyor, using the 3769.9 N pull at 0.5 MPa to retract the stop quickly and the -S magnet to confirm position.
Is the Airtac ACE Compact Cylinder ACE100X20SH the Right Cylinder?
When sizing, compare this 100 mm bore with the 80 mm bore that pushes 2513 N at 0.5 MPa, or step up to the 125 mm bore with 6135.9 N push for heavier work. The 20 mm stroke is short, so confirm your cycle time and speed stay within the 30-500 mm/s range. Since this is a double acting cylinder, air both extends and retracts the rod, but it will not hold a load if air pressure is lost or the valve is centered; for a held position, add a rod lock or pilot check valve. The 1/4" port matches standard fittings, and the optional -S magnet is already fitted here, so you can wire CMSE or DMSE switches directly to your PLC.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X20SH FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3769.9 N. At 0.7 MPa, push rises to 5497.8 N and pull to 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. These numbers help you size for clamping, pressing, or lifting applications.
The ACE100X20SH has a short-body ISO 21287 construction that saves about 50% of the mounting length compared to an ISO 15552 profile cylinder. This lets you install it in compact jigs, guards, or gantries. The fixed TPU bumper absorbs end-of-stroke energy, and the optional -S magnet enables CMSE or DMSE switch mounting for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X20SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.